Sheetmetal Technician Jobs

• Candidate will be performing sheet metal modifications on commercial aircraft. 
• Complete all tasks to the quality standards of FAA and our customers’ approved maintenance manual.  
• Perform work within estimated or budgeted hours.  
• Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, ...

SHEET METAL TECHNICIAN III 

• These individuals should have the ability to read, interpret and understand blueprints and other documents to accurately determine and plan the work steps to be performed including correctly sizing and drilling holes for riveting.
• Performs basic to complex assembly and fitting of parts, structures, drilling and riveting ...

Skill: Sheetmetal Tech

Duration: 3+ months (open ended)

Location: Little Rock, AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered 

Description:

Installation of airframe ...

Safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

Essential Functions

• Use complicated schematics/blueprints, engineering ...

Position Purpose:

In a team oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department.

Principal Duties and Responsibilities:

Essential Functions:

• Perform assembly and fitting of detail parts and structures and varied drilling ...

• Installs all applicable aircraft systems/payloads to the engineering intent through the use of electronic media (work instruction, model based definition,specifications, requirements documents, MRB dispositions, etc).
• Installs, adjusts and validates modules and components required for all systems/payload installations).
• Proficient with all equipment and tools associated ...

This Sheetmetal Technician role is responsible for supervising, mentoring and leading a group of sheetmetal technicians during, inspecting, repairing, modifying, and updating aircraft structures including primary, secondary and tertiary structures, frames, skins, flight controls, cowlings, doors, antenna mounts, doublers, special mission structures, etc.

Essential Functions Statement:

Seeking a Sheet Metal Mechanic in Nashville, TN

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications. 

JOB ...

Seeking a Sheet Metal Mechanic with an A license in Macon, GA

• Will be working heavy checks as well as other projects 
• Repair, fabrication, modification, and installation of sheet metal parts, items, and assemblies.
• Sheet metal mechanic work requires knowledge of the physical properties and working characteristics of sheet metal, ...

Seeking Sheet Metal Mechanics in Macon, GA

• Will be working heavy checks as well as other projects 
• Repair, fabrication, modification, and installation of sheet metal parts, items, and assemblies.
• Sheet metal mechanic work requires knowledge of the physical properties and working characteristics of sheet metal, knowledge of tools and ...

Seeking a Sheet Metal Mechanic in Nashville, TN

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications. 

JOB ...

Seeking heet Metal Mechanics in Nashville, TN

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications. 

JOB ...

Description/Comment:  

• To build a variety of routine sheet metal parts and assemblies. Works from blueprints, work orders, templates, oral and written instructions to fabricate and assemble sheet metal parts where detailed instructions are available but minor decisions and some judgment is required to meet specifications. Assists with the development ...

• Currently seeking experience Structures Mechanics with more than 3 years experience to work at a Commercial Aircraft Facility in Duluth, MN. Overtime is available.
• Will consider all types of large aircraft (ie Commercial, Regional,  Military) as long as they possess Sheet Metal Experience
• (NOT CONSIDERING SHEET METAL ASSEMBLY EXPERIENCE, MUST ...

• Currently seeking Structures Mechanics with less than 3 years experience to work at a MRO Commercial Aircraft Facility in Duluth, MN. Overtime is available.
• Crucial need for Sheet Metal Mechanics with heavy transport experience ie Commercial, Regional will also consider the following examples of Military aircraft experience C-130, KC-135, KC-10, C-17, C-5. only ...

Job Requirements:

• Looking for candidates with 5+ years experience on Commercial (Boeing, MD80/90) aircraft for the PREMIUM position.  
• Cargo Door mod experience or simply heavy structures and mod experience will be considered, not any Sheetmetal assembly type work.  
• Willing to look at resumes with Military type C-40A/B/C ...

General

• Has intermediate knowledge of all areas of the aircraft and assigned work area.

• Repair, modify, replace or otherwise perform routine aircraft maintenance work in specialized area of aircraft.

• Develop repair schemes utilizing SRM or Engineering data

• Communicate effectively with other maintenance personnel ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: Please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works ...

Skill: Sheetmetal technicians.  

Location: Miami, FL

Aircraft: Commercial (Boeing, Airbus, etc.)

Compensation: Please call Strom Aviation for compensation details 800.743.8988

Must be able to accomplish any and all repairs, modification, E.A.'s, etc, with minimal or no supervision on commercial and regional aircraft.  Must be able to use ...

Job Summary: Looking for a structures / sheetmetal mechanic for a contract in Springfield, MO. Will be performing repairs on EMB-120, Saab 340 and Metros. Prefers a A&P license.

New higher rates!

Monday – Friday 1st shift schedule!

Overtime available!

Long term work with advancement opportunities!

Working EMB120’s, Saab ...

Skill: Sheetmetal Junior Mechanic

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

Skill: Sheetmetal Mechanic

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required ...

Sheetmetal Installation: 80%

• Read detailed plans and diagrams and inspect and measure parts prior to assembly, making sure parts are free of defects and   are the right size.
• Install Sheet metal parts and assemblies in aircraft; assure that installations are attached without endangering aircraft structure or systems operations and functions.
• Cut, ...

Skill: Sheetmetal Mechanic

Duration: 3+ months (open ended)

Location: Tucson/Marana, AZ

Aircraft: MD-80, CRJ

Salary: Please call Strom Aviation for compensation details (800) 743-8988

Description:

Sheetmetal Mechanics contractors ...

Location: Marana AZ

Duration: 3 - 6 months

Aircraft: Commercial aircraft (Boeing, Airbus etc)  Wide Body facility

Description: Current need for contractors with experience working Commercial aircraft such as the 747

• A minimum of 5 years related aircraft experience performing heavy maintenance and modifications.  
• Experience with ...

• Repair/replace aircraft structural components according to drawings, blueprints, directives, technical manuals and safety procedures
• Perform sheet metal bends to guidelines and specifications as dictated in normal aviation practices
• Remove existing rivets from aircraft structure 
• Work with and around a variety of chemicals and follow all OSHA standards ...

• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical ...

Looking for candidates with 5+ years experience on Commercial (Boeing, MD80/90) aircraft for the PREMIUM position.  Cargo Door mod experience or simply heavy structures and mod experience will be considered, not any Sheetmetal assembly type work.  

A&P license preferred but not required.

POSITION SUMMARY:  Perform ...

1. Installs, inspects, tests, adjusts, and repairs aircraft avionics equipment and systems, including radio systems, radar, and navigation systems.
2. Troubleshoots and corrects problems related to avionics systems through the use of wiring diagrams and maintenance manuals. Reads blueprints and schematics.
3. Lays out installation of aircraft avionics assemblies and systems.
4. Sets ...

The Structures Mechanic is responsible to inspect, overhaul, repair, modify, and troubleshoot airframe parts, systems, and components.

The Structures Mechanic is responsible to perform work within estimated time and within FAA, and customer standards of quality.  

Perform sheetmetal repairs during Heavy checks on Commercial aircraft 

Ability to follow and ...

Aircraft Technician A - Sheet metal will perform work on assigned aircraft, assemblies, and parts in sheet metal area.

This position is expected to be approximately six (6) months in duration.

Primary Responsibilities:

Sheetmetal Installation: 80%

• Read detailed plans and diagrams and inspect and measure parts prior ...

• Inspect, overhaul, repair, modify and troubleshoot airframe and/or powerplant parts, systems, and components utilizing approved maintenance documents.
• Support engineering in developing repairs and modifications for transport category airplanes.  
• Assist engineers by utilizing fundamental design principals and knowledge of metals and metal fabrication.  
• Fabricate ...

Component Structure Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft components such as flaps, slats, rudder and cargo doors in compliance with policies, manuals, procedures and requirements.

• Repair, replace, and rebuild components

• Utilize OEM and Engineering drawings to modify aircraft components

• ...

Seeking a Sheetmetal Technician in Boise, ID
The Structures Technician will perform structure maintenance, repair and/or modification on customer aircraft in
accordance with applicable technical data, customer maintenance program requirements, within estimated or
budgeted hours, and within FAA and customer standards of quality under the direction and supervision ...

Location: Marana, AZ

Duration: 3 - 6 months

Aircraft :  Commercial aircraft (Boeing, Airbus etc)  Wide Body facility

Description: Current need for contractors with Sheetmetal experience working Commercial aircraft such as the 747

A minimum of 3 years related aircraft sheetmetal experience performing repairs in heavy maintenance checks and modifications. ...

Currently seeking Sheetmetal Assembly Mechanics in Savannah, GA with a Mimimum of 4 Years Structural Assembly Experience. 

S-M Mechanic will get 3 weeks hands on training before working on the aircraft including experience with:

• Hiloks
• Sealant
• Drilling Closer Tolerance Holes

In a team ...

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate ...

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
• Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, ...

Skill: Sheetmetal Technician Sr

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary: please call Strom Aviation for compensation details (800) 743-8988 

Description:The Sheetmetal Technician Senior works under ...

• Structures Technicians with 3+ years experience on helicopters for long term assignments. 
• Our client is seeking an Aviation Structures Technicians with 5+ years experience on helicopters for long term assignments.  
• Set up and operate fabricating machines such as shears, breaks, presses, forming rolls and routers, to cut, bend, block and form or straighten ...

Skill: Sheetmetal Technician II

Duration: 3+ months (open ended)

Location: Cahokia IL

Aircraft: Gulfstream

Salary:

please call Strom Aviation for compensation details

Description:The Sheetmetal Technician II works under general supervision ...

Currently seeking Sheetmetal Technicians with 2 years of sheetmetal and/or fabrication experience on aircraft in Savannah, GA

The Sheetmetal Technician I works independently or with moderate supervision to fabricate and install complex interior subassemblies in aircraft.

Training:

S-M Mechanic will get 3 weeks hands on training before ...

Currently seeking Senior Sheetmetal Technicians in Savannah, GA

The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed ...

• Huge Travel Pay and Bonus Program Available for this position.
• Candidates must have at least 3 years of Aircraft Structures / Sheetmetal experience  with at least 6 months being in the last 2 years. 
• Client works on both Airbus and Boeing Aircraft.
• Client has heated hangars and long term work. 
• Immediate feedback on resumes with ...

• Seeking Structures Technician in Greybull, Wyoming.
• The Structures Technician will perform structure maintenance, repair and/or modification on customer aircraft in accordance with applicable technical data, customer maintenance program requirements, within estimated or budgeted hours, and within FAA and customer standards of quality under the direction and supervision ...

S-M Mechanic will get 3 weeks hands on training before working on the aircraft including experience with:

• Hiloks
• Sealant
• Drilling Closer Tolerance Holes

The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. ...

• Repair, replace, and rebuild aircraft structures
• Utilize OEM and Engineering drawings to modify aircraft structure or interiors
• Complete specialized tasks, such as flap ...