Entry Level Aviation Jobs

Currently seeking Entry Level Avionics Installers in Savannah, GA

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Essential Functions:

• Assists ...

Currently seeking Entry Level Avionics Installers in Savannah, GA

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Essential Functions:

• Assists ...

• Verifies routine product conformance to design requirements. Provides objective evidence of results. Performs auditing, surveillance and monitoring. Identifies and documents discrepancies. Segregates and controls non-conforming items.
• Performs preliminary review and disposition of non-conformance. Conducts product review with customer during product or process verification. ...

Currently seeking Entry Level Sheet Metal Mechanics for an Operations Trainee position in Savannah, GA

This is an entry-level position in which the individual will be trained in the manufacturing processes of the aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations in a production department.

S-M ...

Seeking an A&P Technician in Boise, ID

Inspect, test, repair, maintain, and service aircraft using test equipment and hand tools, as needed,
to return aircraft to service per FAA and manufacturers specifications.
Job Duties:

• Performs routine maintenance and inspections on corporate aircraft
• Ensures proper ...

• A&P Mechanics . Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation
• Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness.
• Perform ...

Currently seeking Aircraft Plumbers in Savannah, GA  

Under general supervision, fabricates, troubleshoots and repairs water, oxygen, and vent systems using aircraft specifications and design/engineering drawings. 

Essential Functions:

• Performs tasks layout, tube/hose fabrication and installation ...

• Troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required
• Adhere to Clients General Work Requirements (Factory, Shop and / or Hangar positions)
• Comply with environmental health / safety policies and procedures. Participate in ...

The Composites Mechanic performs aircraft maintenance and/or repairs within estimated time and in accordance with applicable  FAA, and customer standards of quality.

• Fabricate parts as required.
• Layout and perform complex structural repairs.
• Follow all applicable specifications to accomplish a specific task.
• Maintain a clean and safe working ...

• Working storage checks Aircraft tie-down and mooring, Aircraft venting, Return to service from storage,  Airframe and engine sealing and preservation
• Ability to organize and plan work adhering to deadlines; attention to detail and mathematical skills; ability to read, write, and understand the English language and to follow verbal and written instruction
• Ability ...

• Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation
• Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness.
• Perform work within estimated ...

Seeking Entry Level Cabinet Finishers in Savannah, GA

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

• Currently seeking Structures Mechanics with less than 3 years experience to work at a MRO Commercial Aircraft Facility in Duluth, MN. Overtime is available.
• Crucial need for Sheet Metal Mechanics with heavy transport experience ie Commercial, Regional will also consider the following examples of Military aircraft experience C-130, KC-135, KC-10, C-17, C-5. only ...

We are currently seeking A&P Mechanics in Duluth, MN that are considered New A&P Graduates (Entry-Level) up to 3 years of experience - A&P License Required

• Repair, modify, replace or otherwise perform routine aircraft maintenance work in specialized area of aircraft.
• Rigged Flight Controls, Remove and Replaced Flight Controls
• Removed ...

Job Requirements:

• Looking for candidates with 5+ years experience on Commercial (Boeing, MD80/90) aircraft for the PREMIUM position.  
• Cargo Door mod experience or simply heavy structures and mod experience will be considered, not any Sheetmetal assembly type work.  
• Willing to look at resumes with Military type C-40A/B/C ...

Currently seeking Entry Level Avionics Technicians in Savannah, GA to work in a Repair Station environment 

• Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact.
• Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal ...

Skill: Avionics Junior Technician

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

Skill: A&P Mechanic (1-3 Years)

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Must be able ...

Currently seeking Entry Level Sheet Metal Mechanics for an Operations Trainee position in Savannah, GA

This is an entry-level position in which the individual will be trained in the manufacturing processes of the aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations in a production department.

S-M ...

Skill: Sheetmetal Junior Mechanic

Duration: 3+ months (open ended)

Location: Oklahoma City OK

Aircraft: 737, MD-80, CRJ, ERJ, C-40

Salary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses Offered

Description:

Must ...

Currently seeking Interior Installers with 1 Year experience in Savannah, GA

The Interior Installation Technician I works under close supervision to remove and install and/or fabricate aircraft interiors by using company operating procedures and quality standards.

Essential Functions:

• Safely perform aircraft removal, ...

Currently seeking Entry Level Avionics Installers in Savannah, GA

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Essential Functions:

• Assists ...

Currently seeking Cabinet Builders in Savannah, GA

Under direct supervision, learns and performs the basic skills and functions related to fabrication of aircraft cabinets and other wood-surfaced subassemblies using design and engineering drawings.

Essential Functions:

• Learns entry-level technical skills and knowledge, regulatory ...

Currently seeking an Entry Level Aircraft Painter for and Aircraft Prep Trainee position in Savannah, GA

The A/C Prep Trainee works along side higher level employees to assist with the preparation and painting of aircraft.

Essential Functions:

• Assists in the preparation of the exterior surfaces of aircraft for application ...

Currently seeking Entry Level Avionics Technicians in Savannah, GA 

• Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact.
• Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal ...