Job Information - Job #2130037046 Filled - Use Search for More Options (ID# 2130037046)

• Health Insurance
• Holiday Pay
• Longevity Bonus
• 401K Programs

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
• Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
• Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
• Assist in providing time estimates as required
• Fabricate sheet and/or composite components

 The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements
• Comply with Environmental / Health / Safety policies and procedures.
• Participate in 5-S activities
• Perform all work in a safe and timely manner
• Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
• Perform and document work performed per appropriate manuals and regulations as required
• Operate ground support equipment as required
• Perform mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Assist in providing time estimates
• Assist in performing complex repairs on aircraft systems
• Perform other duties as assigned
   

• No Tools required

• Program is offering an assignment completion bonus of $10,000.00 (contingent upon completion/passing of training, obtaining access & 180 visits through the turnstile).

• Tenured contractors are also eligible for another completion bonus at 180, 360, 540 etc. through the turnstile

• Returning contractors who have already received a bonus are now eligible for this bonus.

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

• Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
• Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
• Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
• A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
• The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
• Maintain necessary certifications, licenses and permits as required for assigned work.
• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays.
• Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Looking for a Flight Operation Specialist to perform a combination of responsibilities consisting of complex mechanical duties in all fields of specialization for the flight line, including power plant, run-in plumbing, hydraulics, rigging, and controls, and structures and surfaces on the complete airplane. Performs mechanical and operational duties for pre-flight and post-flight service and inspection and/or in preparation of customer acceptance of completed airplanes. Performs operations such as disassembling, repairing, replacing, rechecking, testing, re-rigging, servicing, and re-installing as necessary. Operates aircraft power plants and ground equipment during acceptance checks, trouble shooting and routine maintenance of aircraft. May troubleshoot malfunctions/defects and schedule/modify maintenance procedures. Maintain practical knowledge of certified aircraft and ground support systems such as controls, fuel, hydraulic, pneumatic, electronic, fire control and armament components.

• Performs developmental, experimental, and production aircraft maintenance, repair, modification, installation, and testing tasks in a field of specialization; electrical/electronic, mechanical, or instrumentation.
• Instructs, coordinates, and performs the duties/functions of Flight Test personnel in area(s) of assignment.
• Determines the sequence for installing, removing, maintaining, repairing, or fabricating critical aircraft components, or electrical/electronic, mechanical, or instrumentation systems.
• Performs testing, rework, and repair in various fields of specialization.
• Applies shop theory and skills in accomplishing assigned tasks, working from incomplete engineering, electronic data, blueprints, sketches, engineering drawings, technical orders, and written and verbal instructions.
• Works from blueprints, engineering orders, schematics, repair manuals, and other technical documents on aircraft electrical/electronic, mechanical, plumbing, and hydraulics, power plant, structures, or instrumentation systems.
• Performs drilling, reaming, fitting, assembly, trimming, riveting, splicing, insulating, and other associated duties as assigned.
• Performs electrical, mechanical, or instrumentation maintenance, repair, and testing in support of specific flight test projects.
• Constructs, troubleshoots, calibrates, adjusts, tests, and maintains various types of complex aircraft equipment, components, devices, or systems.
• Performs modifications and adjustments as necessary.
• Notifies lead personnel or supervision of any/all malfunctions, defects, and damages of equipment, material, and product.
• Checks work for completeness and accuracy.
• Performs Production Accountability duties associated with the processing, verification, quality auditing, and inspection of assemblies, parts, and tooling for which the individual has been delegated production accountability.
• May be required to work in other fields incidental to, and in connection with completion of assignment.
• May be required to perform other related duties as assigned

Looking for a Avionics Technician to install and troubleshoot avionic systems wiring in aircraft in accordance with technical specifications, engineering instructions, and FAA regulations. Fabricates, installs and tests installation, routing, clamping and wiring harnesses. Reads wiring diagrams and blueprints.

• Performing duties required to lay out, fabricate, and install electrical wiring, fiber optic, coaxial cable, and electrical components on aircraft.
• Interpreting technical blueprint/drawings, process specifications, manufacture instructions, and documenting maintenance.
• Checks, tests, and troubleshoots avionics and electrical systems for conformance to specifications and performs repair, removal, and reinstallation of wiring as necessary.
• Ensure aircraft are in exceptional mechanical condition and safe for flight by performing maintenance, inspections, and servicing requirements on all aircraft systems in accordance with JTD and all applicable program and service guidance.
• Cuts wire to length; strips insulation from wire ends and insulates connections with plastic sleeves.
• You will perform and/or assist with Field-Level Modifications and TCTD maintenance actions.
• You will assist with OJT training for team members and partner aircraft maintenance personnel.
• You will perform other duties as assigned by the Aircraft Maintenance Manager.
• You will use your training, knowledge, and experience to obtain special certifications (example: confined space, borescope, etc.) as locally required.
• Utilize aircraft ground support equipment to perform aircraft maintenance tasks.
• Configuring aircraft for modifications, removal and installation of attaching hardware, component removal and installations, assistance with software uploads, various system operational checkouts, and egress system maintenance.
• Fault isolation, troubleshooting, and repair of system failures detected during operational checks associated with modifications and restoration of aircraft to flying condition subsequent to accomplishment of modifications and maintenance. Interprets and uses various test equipment and works from wiring diagrams, engineering drawings, job guides, and maintenance manuals.
• Conduct maintenance operations in accordance with policies and procedures set forth by governing regulatory documents to include tool control, quality, safety, aircraft maintenance documentation, etc.

Looking for a Aircraft Structures Mechanic to perform a variety of operations to assemble and make major assembly structures such as fuselage panels and bulkheads, and structural subassemblies such as rudders, flaps, and stabilizers. Aligns parts on jigs using templates and fixtures. Performs such minor part-fitting operations as filing, sawing, burring, crimping, trimming, framing, riveting, drilling, and reaming. Measures parts with micrometers and calipers to verify dimensions. May modify incomplete and complete assemblies to incorporate changes to structure. May monitor and verify quality in accordance with statistical process or other control procedures.

• Performs a variety of operations to assemble and make major assembly structures such as fuselage panels and bulkheads, and structural subassemblies such as rudders, flaps, and stabilizers
• Aligning parts on jigs using templates and fixtures
• Performs minor part-fitting operations: filing, sawing, burring, crimping, trimming, framing, riveting, drilling and reaming
• Measures parts with precision tools such as, micrometers and calipers to verify dimensions
• May modify incomplete and complete assemblies to incorporate changes to structure
• May monitor and verify quality in accordance with statistical process or other control procedures
• Use of appropriate PPE when working on the shop floor
• Translate blueprints into fabrications of structural assemblies to include: precision drilling, countersinking, and the use of calibrated tools
• Performs modifications and adjustments as necessary.
• Notifies lead personnel or supervision of any/all malfunctions, defects, and damages of equipment, material, and product.
• Checks work for completeness and accuracy.
• Performs Production Accountability duties associated with the processing, verification, quality auditing, and inspection of assemblies, parts, and tooling for which the individual has been delegated production accountability.
• May be required to work in other fields incidental to, and in connection with completion of assignment.

Skill: Upholstery Tech

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Fabricate, develop, build, sew, and cover aircraft soft goods through the knowledge and skills of aircraft upholstery via completion 3d models, drawings, blueprints, IDEI drawings, and/or spec control prints following Quality standards. Soft goods include crew seats, passenger seats, divans, side ledges, headliners and other assorted interior soft goods.

Fabricate, assemble, install, and repair sheet metal parts by using products and processes which are varied but generally not complex in scope.

Must read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, epoxy resins, rubber and like materials.

Paint removal, metal forming, fastener use, disassembly/reassembly of mechanical components.

Corrosion removal and surface treatment.

Selects tooling and materials compatible with the processing techniques identified in the work instructions and documentation of repairs

Troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
• Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
• Operate ground support equipment as required
• Assist with mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Perform other duties as assigned
 

Skill: Cabinet Builder

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP Corporate

Salary: please call for compensation details (800) 743-8988

Job Description:

• Fabricate high quality cabinetry, devan, ledges etc and other wood-surfaced subassemblies.
• Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail.
• Request material needs timely to ensure a continuous work flow.
• Follows all department safety guidelines and ensure proper usage of tools and equipment.
• Other duties as assigned but not covered herein.

• Performs regular maintenance on aircraft.
• Project Management; accurately estimates work time and materials for assigned tasks.
• Fully analyzes all required blueprints, drawings, work orders and sketches to troubleshoot, repair and install desired product or part. Detects errors and corrects through proper departmental channels.
• Ensures proper working condition of mechanical systems before flight.
• Maintains records of maintenance, repairs, inspections, and any reports related to parts or services.
• Inspects and examines engines, wings, propellers, tails, and other parts to identify cracks, corrosion, or other defects. 
• Inspects hoses and lubricates joints; replaces any that show signs of needing repair. 
• Consults maintenance manuals and specifications to identify correct operations and specifications for replacements or repairs.
• Installs new parts to replace or repair defective or recalled parts or to enhance the performance of the aircraft; performs these tasks efficiently and to specifications. 
• Repairs sheet metal as needed.
• Ensures proper function of engines and operating systems via a variety of tests and tools. 
• Identifies and resolves mechanical problems based on visual inspections or reports from pilot or crew. 
• Performs other related duties as assigned.
• Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

• Performs regular maintenance on aircraft.
• Project Management; accurately estimates work time and materials for assigned tasks.
• Fully analyzes all required blueprints, drawings, work orders and sketches to troubleshoot, repair and install desired product or part. Detects errors and corrects through proper departmental channels.
• Ensures proper working condition of mechanical systems before flight.
• Maintains records of maintenance, repairs, inspections, and any reports related to parts or services.
• Consults maintenance manuals and specifications to identify correct operations and specifications for replacements or repairs.
• Installs new parts to replace or repair defective or recalled parts or to enhance the performance of the aircraft; performs these tasks efficiently and to specifications. 
• Repairs sheet metal as needed.
• Ensures proper function of engines and operating systems via a variety of tests and tools. 
• Identifies and resolves mechanical problems based on visual inspections or reports from pilot or crew. 
• Performs other related duties as assigned.

The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements
• Comply with Environmental / Health / Safety policies and procedures.
• Participate in 5-S activities
• Perform all work in a safe and timely manner
• Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
• Perform and document work performed per appropriate manuals and regulations as required
• Operate ground support equipment as required
• Perform mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Assist in providing time estimates
• Assist in performing complex repairs on aircraft systems
• Perform other duties as assigned

• Health Insurance
• Holiday Pay
• Longevity Bonus
• 401K Programs

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
•  Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
•  Assist in providing time estimates as required
• Fabricate sheet and/or composite components