Job Information - Job #2130036593 Filled - Use Search for More Options (ID# 2130036593)

 The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements
• Comply with Environmental / Health / Safety policies and procedures.
• Participate in 5-S activities
• Perform all work in a safe and timely manner
• Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
• Perform and document work performed per appropriate manuals and regulations as required
• Operate ground support equipment as required
• Perform mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Assist in providing time estimates
• Assist in performing complex repairs on aircraft systems
• Perform other duties as assigned
   

• No Tools required

• Program is offering an assignment completion bonus of $10,000.00 (contingent upon completion/passing of training, obtaining access & 180 visits through the turnstile).

• Tenured contractors are also eligible for another completion bonus at 180, 360, 540 etc. through the turnstile

• Returning contractors who have already received a bonus are now eligible for this bonus.

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

• Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
• Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
• Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
• A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
• The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
• Maintain necessary certifications, licenses and permits as required for assigned work.
• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays.
• Mission requirements and/or workload may require both scheduled and unscheduled overtime.

The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements
• Comply with Environmental / Health / Safety policies and procedures.
• Participate in 5-S activities
• Perform all work in a safe and timely manner
• Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
• Perform and document work performed per appropriate manuals and regulations as required
• Operate ground support equipment as required
• Perform mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Assist in providing time estimates
• Assist in performing complex repairs on aircraft systems
• Perform other duties as assigned

Contractor Benefits/Incentive:

• $100 travel pay on first check
• Health Insurance
• Holiday Pay
• Longevity Bonus
• 401K Programs

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
•  Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
•  Assist in providing time estimates as required
• Fabricate sheet and/or composite components

Fabricate, assemble, install, and repair sheet metal parts by using products and processes which are varied but generally not complex in scope.

Must read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, epoxy resins, rubber and like materials.

Paint removal, metal forming, fastener use, disassembly/reassembly of mechanical components.

Corrosion removal and surface treatment.

Selects tooling and materials compatible with the processing techniques identified in the work instructions and documentation of repairs

Seeking A&P mechanics in Macon, GA

• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
• Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Consults the Maintenance Lead if technical assistance is needed during the repair process.
• Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping after finishing all designated operations.
• Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
• Provides supervisor with performance statistics and other operational data, as requested.
• Properly accounts for time and materials used in all inspection and maintenance activities.
• Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Seeking A/P Mechanics in Nashville, TN -- Work will be performed on Regional Aircraft. 

• Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications.
• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
• Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Consults the Maintenance Lead if technical assistance is needed during the repair process.
• Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping after finishing all designated operations.
• Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
• Provides supervisor with performance statistics and other operational data, as requested.
• Properly accounts for time and materials used in all inspection and maintenance activities.
• Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
   

Seeking A&P mechanics in Macon, GA

• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
• Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Consults the Maintenance Lead if technical assistance is needed during the repair process.
• Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping after finishing all designated operations.
• Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
• Provides supervisor with performance statistics and other operational data, as requested.
• Properly accounts for time and materials used in all inspection and maintenance activities.
• Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.