Job Information - Job #2130035915 Filled - Use Search for More Options (ID# 2130035915)

Oh no! It looks that job has already been filled! Please review our other listings for more opportunities.


Featured Job

Structures Technician- NEW HIGHER RATE posted 8/28/2023 Ref No. 2130036825

Equipment: Commercial Aircraft
Location: Bridgeport, WV

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
  • Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  • Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  • Assist in providing time estimates as required
  • Fabricate sheet and/or composite components

Featured Job

A&P Mechanic NEW HIGHER RATE posted 8/28/2023 Ref No. 2130036824

Equipment: Commercial Aircraft
Location: Bridgeport, WV

 The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

  • Adhere to General Work Requirements
  • Comply with Environmental / Health / Safety policies and procedures.
  • Participate in 5-S activities
  • Perform all work in a safe and timely manner
  • Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment as required
  • Perform mechanical / electrical removals and installations
  • May assist with maintenance at off-site locations
  • Assist in providing time estimates
  • Assist in performing complex repairs on aircraft systems
  • Perform other duties as assigned
     

 

Featured Job

Assembler C - Cabin Interior Specialist posted 7/12/2024 Ref No. 2130037830

Equipment: Military Aircraft
Location: San Antonio, TX

Seeking Aircraft Cabin Interior Specialists to support the Interior Repair Team based out San Antonio, Tx.

This position will perform decorative interior repair in the aircraft cabin on assemblies made from various types of material including fiberglass, plastic and composites using various methods, including but not limited to painting and sweep and fill. This job is performed at various stages of the aircraft assembly process, in factory and/or flight line locations.

Position Responsibilities:

  • Ability to read and understand engineering drawings and instructions to select correct parts, materials, tools, assemblies, standards, and hardware used to install, fit, fasten, align, adjust and perform the necessary per-installation and installation of interiors.
  • Understanding of proper cleaning methods, surface preparation, cleaning, and masking for rework.
  • Majority of responsibility is for non-baseline work requiring interpretation of established processes and instructions to troubleshoot and develop solutions to complex non-standard work.
  • Work independently with limited direction from lead and manager.
  • Report and work to resolve job constraints including but not limited to errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Boeing procedures.
  • Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards.
  • Maintain clean, neat, organized and FOD free work area.
  • Possess understanding and knowledge of basic computer systems and programs.
  • Ability to correspond with internal teams and external suppliers and customers with dignity, respect and integrity while exhibiting our values at all times.
  • Ability to perform the following requirements:
  • Rotation of head/neck, bending and twisting at the waist, walking, standing, kneeling, crouching, climbing/balancing, flexion/extension, lifting and carrying less than 35 pounds, contact with liquid coatings, plastics, sealants and solvents, exposure to noise, and the use of personal safety gear for face, eyes, hand/arm, and ears.
  • There will also be a requirement to work in elevated and/or confined spaces in indoor temperature-controlled environments as well as outdoor open environments.

Featured Job

Cabinet Builder posted 7/9/2024 Ref No. 2130037669

Equipment: Corporate Aircraft
Location: Little Rock, AR

Skill: Cabinet Builder

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description: 

Fabricate aircraft cabinets and perform other functions that support the delivery of aircraft cabinets using cabinet construction skills in conformance with procedures and guidelines and to the standards of high quality. - Assemble and complete the most complex aircraft cabinet components at or above the expected standards of safety, quality, schedule and cost, using engineering and industrial definitions, procedures and guidelines that support the delivery to the aircraft for all aircraft models.

Featured Job

Painter posted 7/3/2024 Ref No. 2130037868

Equipment: Military Aircraft
Location: San Antonio, TX

San Antonio Manufacturing Center is seeking a painter for their Emergent Paint Center.

In this role the individual work assignments that will require them to mix paint, work with chemicals and all the preparation work required to prep the parts for paint application. This position will require them to work closely with other team members so the ability to work with others and share responsibilities is a desired attribute. This position will also require the ability to search and read the specifications in the DPS, engineering drawings to complete assignments given.

Position Responsibilities:

  • The Aircraft Painter coats surfaces of aircraft with paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper.
  • Smoothes surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and paint insignia, letters or numerals on aircraft surface, using stencils.


Paint Experience:

  • Relevant paint experience is considered painting multi-staged paint processes (base coat/clear coat) at large scale with compressed air (automobile, boat, etc.).
  • Adhesive Materials/Processes - Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc.) and processes.
  • Color Match - Knowledge of color space, color analysis, paint formulation, and paint application techniques to evaluate, match, and develop decorative finishes.
  • Engineering Drawings & Specs - Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
  • General Shop Processes - Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).
  • Materials & Processing - Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).
  • Organic Chemical Processing - Knowledge of organic chemical processes (such as top-coating, priming, surface cleaning).
  • Polymers & Composite Materials - Knowledge of po

Featured Job

Quality Inspector posted 6/17/2024 Ref No. 2130037821

Equipment: Commuter
Location: New Iberia, LA

  • Conduct inspections and surveillance of aircraft and communicate discrepancies by way of verbalization and written word.
  • Obtain access to aircraft internal areas by way of entry doors, access doors, access panels, and aircraft emergency exits.
  • Obtain access to aircraft external areas utilizing various aerial lifts including scissor lifts and articulate boom lifts
  • Work in awkward positions restricted by safety harness and other personal protective equipment (PPE).
  • Utilize mathematical skills and ability for balance calculations and critical measurements.
  • Demonstrate proficiency in all inspection methods, techniques, and equipment.
  • Conduct inspection and surveillance of the aircraft maintenance programs and communicate discrepancies by way of verbalization and written word.
  • Conduct inspections and surveillance of the aircraft facility and communicate discrepancies by way of verbalization and written word.
  • Ability to interpret blueprints and drawing and apply to aircraft.
  • Maintaining a clean and safe work area.

Featured Job

Structures Mechanic posted 6/11/2024 Ref No. 2130037811

Equipment: Commercial Aircraft
Location: San Antonio, TX

  • No Tools required
  • Program is offering an assignment completion bonus of $10,000.00 (contingent upon completion/passing of training, obtaining access & 180 visits through the turnstile).

  • Tenured contractors are also eligible for another completion bonus at 180, 360, 540 etc. through the turnstile

  • Returning contractors who have already received a bonus are now eligible for this bonus.

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

  • Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
  • Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
  • Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
  • Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
  • Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
  • Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
  • A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
  • The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
  • Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
  • Maintain necessary certifications, licenses and permits as required for assigned work.
  • The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
  • Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays.
  • Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Featured Job

Painter posted 5/28/2024 Ref No. 2130037761

Equipment: General Aviation
Location: Sandpoint, ID

Skill: Aircraft Painter

Duration: Long term

Location: Sandpoint, ID

Aircraft: Kodiak -General Aviation

Salary: please call Strom Aviation for compensation details (800) 743-8988  

Description of Responsibilites:

  • Mix primers and paints per the manufacturer’s recommendations.
  • Read and interpret job travelers, prints, and other instructions to prime and/or paint parts to meet Type Design requirements
  • Clean and maintain spray guns, work benches, and other equipment associated with the paint booth.

Featured Job

Sheetmetal Tech posted 5/24/2024 Ref No. 2130037756

Equipment: Commercial Aircraft
Location: Farmers Branch, TX

Fabricate, assemble, install, and repair sheet metal parts by using products and processes which are varied but generally not complex in scope.

Must read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, epoxy resins, rubber and like materials.

Paint removal, metal forming, fastener use, disassembly/reassembly of mechanical components.

Corrosion removal and surface treatment.

Selects tooling and materials compatible with the processing techniques identified in the work instructions and documentation of repairs

Featured Job

Upholstery Tech posted 4/30/2024 Ref No. 2130037666

Equipment: Corporate Aircraft
Location: Little Rock, AR

Skill: Upholstery Tech

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Fabricate, develop, build, sew, and cover aircraft soft goods through the knowledge and skills of aircraft upholstery via completion 3d models, drawings, blueprints, IDEI drawings, and/or spec control prints following Quality standards. Soft goods include crew seats, passenger seats, divans, side ledges, headliners and other assorted interior soft goods.

Featured Job

A&P Mechanic posted 4/23/2024 Ref No. 2130037620

Equipment: Regional Aircraft
Location: Macon, GA

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Featured Job

Composite Technician posted 3/14/2024 Ref No. 2130037476

Equipment: General Aviation
Location: Sandpoint, ID

Under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment.

  • Manufacture composite aircraft parts to meet manufacturing specifications, in a team oriented work environment.
  • Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review.
  • Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations.
  • Check all work and ensure a defect free assembly prior to inspection.

Featured Job

Structural Assembler - Wings posted 3/14/2024 Ref No. 2130037475

Equipment: General Aviation
Location: Sandpoint, ID

Performs functions in a specific area of the production line, such as, assembling, fastening and installing parts on or for the aircraft.

Essential Duties and Responsibilities (other duties may be assigned):

  • Familiarization with the use of hand and power tools.
  • Must be able, or be trainable, to competently install solid rivets commonly used in the construction of aircraft and aircraft assemblies.
  • Experience with blueprint reading preferred.
  • Must be able to apply common sense understanding, carry out instructions, and demonstrate good analytical skills, alphanumeric accuracy and reading comprehension.
  • Ability to demonstrate high attention to detail and the ability to work quickly and thoroughly in a production environment.
  • Must be an excellent team player, be dependable, trustworthy and present self with professionalism.
  • The right individual will be teachable and willing to learn.

Featured Job

A&P Mechanic posted 2/27/2024 Ref No. 2130037417

Equipment: Regional Aircraft
Location: Nashville, TN

Seeking A/P Mechanics in Nashville, TN -- Work will be performed on Regional Aircraft. 

  • Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications.
  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
     

Featured Job

Cabinet Builder Technician III posted 2/22/2024 Ref No. 2130037397

Equipment: Corporate Aircraft
Location: Indianapolis, IN

Skill: Cabinet Builder

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP Corporate

Salary: please call for compensation details (800) 743-8988

Job Description:

  • Fabricate high quality cabinetry, devan, ledges etc and other wood-surfaced subassemblies.
  • Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail.
  • Request material needs timely to ensure a continuous work flow.
  • Follows all department safety guidelines and ensure proper usage of tools and equipment.
  • Other duties as assigned but not covered herein.

Featured Job

AVIONICS posted 1/12/2024 Ref No. 2130037216

Equipment: Commercial Aircraft
Location: Tucson, AZ

Troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
• Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
• Operate ground support equipment as required
• Assist with mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Perform other duties as assigned
 

Featured Job

Structures Technician posted 8/28/2023 Ref No. 2130036827

Equipment: Commercial Aircraft
Location: Tucson, AZ

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  •  Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  •  Assist in providing time estimates as required
  • Fabricate sheet and/or composite components


 

Featured Job

A&P Technician posted 8/28/2023 Ref No. 2130036826

Equipment: Commercial Aircraft
Location: Tucson, AZ

The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

  • Adhere to General Work Requirements
  • Comply with Environmental / Health / Safety policies and procedures.
  • Participate in 5-S activities
  • Perform all work in a safe and timely manner
  • Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment as required
  • Perform mechanical / electrical removals and installations
  • May assist with maintenance at off-site locations
  • Assist in providing time estimates
  • Assist in performing complex repairs on aircraft systems
  • Perform other duties as assigned

Featured Job

A&P Mechanic posted 7/24/2023 Ref No. 2130036706

Equipment: Regional Aircraft
Location: Macon, GA

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.


Job Alert Banner

Search...

Tools Required?
Direct:
Long Term:
Clear Search Criteria

Jobs for...