Job Information - Job #2130036692 Filled - Use Search for More Options (ID# 2130036692)

We were unable to find any jobs matching your criteria - sign up for job alerts to get notified when a matching job is posted, or explore our hot openings below.

Hot Openings

Structures Technician- NEW HIGHER RATE posted 12/30/1899
Ref No. 2130036825

Commercial Aircraft
Bridgeport, WV
Tools Required

Job Duties

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
  • Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  • Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  • Assist in providing time estimates as required
  • Fabricate sheet and/or composite components

Job Qualifications

  • You have a minimum of 2 years of structural sheet metal repair / modification experience or substantiated similar experience
  • You have the ability to interpret and work with mechanical engineering drawing
  • You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
  • You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
  • You must obtain appropriate Ground Support Equipment Qualifications as required
  • You have the ability to work unscheduled overtime including nonscheduled work days and holidays
  • You have the ability to work in seasonal/inclement weather outside
  • You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
  • You have basic PC skills
  • You have minimum of 1 years of corporate / commercial jet experience
  • You have the demonstrated ability to train other employees

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$13.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

A&P Mechanic NEW HIGHER RATE posted 12/30/1899
Ref No. 2130036824

Commercial Aircraft
Bridgeport, WV
Tools Required

Job Duties

 The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

  • Adhere to General Work Requirements
  • Comply with Environmental / Health / Safety policies and procedures.
  • Participate in 5-S activities
  • Perform all work in a safe and timely manner
  • Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment as required
  • Perform mechanical / electrical removals and installations
  • May assist with maintenance at off-site locations
  • Assist in providing time estimates
  • Assist in performing complex repairs on aircraft systems
  • Perform other duties as assigned
     

 

Job Qualifications

  • You have an A & P Certificate
  • You have a minimum of 3 years aircraft maintenance experience or substantiated equivalent experience
  • You have the ability to interpret and work with mechanical engineering drawings
  • You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
  • You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
  • You must obtain appropriate Ground Support Equipment Qualifications as required
  • You have the ability to work unscheduled overtime including nonscheduled work days and holidays
  • You have the ability to work in seasonal/inclement weather outside
  • You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
  • You have basic PC skills
  • You have experience on corporate jet aircraft / commercial aircraft
  • You have Bombardier aircraft model experience
  • You have demonstrated the ability to train other employees

Our client is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by Federal, National, or Local Laws.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$13.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Assembler C - Cabin Interior Specialist posted 12/30/1899
Ref No. 2130037830

Military Aircraft
San Antonio, TX
NO Tools Required

Job Duties

Seeking Aircraft Cabin Interior Specialists to support the Interior Repair Team based out San Antonio, Tx.

This position will perform decorative interior repair in the aircraft cabin on assemblies made from various types of material including fiberglass, plastic and composites using various methods, including but not limited to painting and sweep and fill. This job is performed at various stages of the aircraft assembly process, in factory and/or flight line locations.

Position Responsibilities:

  • Ability to read and understand engineering drawings and instructions to select correct parts, materials, tools, assemblies, standards, and hardware used to install, fit, fasten, align, adjust and perform the necessary per-installation and installation of interiors.
  • Understanding of proper cleaning methods, surface preparation, cleaning, and masking for rework.
  • Majority of responsibility is for non-baseline work requiring interpretation of established processes and instructions to troubleshoot and develop solutions to complex non-standard work.
  • Work independently with limited direction from lead and manager.
  • Report and work to resolve job constraints including but not limited to errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Boeing procedures.
  • Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards.
  • Maintain clean, neat, organized and FOD free work area.
  • Possess understanding and knowledge of basic computer systems and programs.
  • Ability to correspond with internal teams and external suppliers and customers with dignity, respect and integrity while exhibiting our values at all times.
  • Ability to perform the following requirements:
  • Rotation of head/neck, bending and twisting at the waist, walking, standing, kneeling, crouching, climbing/balancing, flexion/extension, lifting and carrying less than 35 pounds, contact with liquid coatings, plastics, sealants and solvents, exposure to noise, and the use of personal safety gear for face, eyes, hand/arm, and ears.
  • There will also be a requirement to work in elevated and/or confined spaces in indoor temperature-controlled environments as well as outdoor open environments.

Job Qualifications

Basic Qualifications (Required Skills/Experience):

  • Ability to work a variable shift.
  • 3+ years of aerospace, fabrication, or manufacturing experience working with decorative finishes.
  • Required technical skills include file, sand, paint, decorative laminate ("declam"), and cosmetic rework (ex. paint color match, surface texture match, etc.)


Preferred Qualifications (Desired Skills/Experience):

  • Experience specialized in design and/or analysis of aircraft interior modifications
  • 3+ years’ related work experience or an equivalent combination of education and experience.
  • 3+ years aerospace experience in cabin systems interiors (ex. galleys, lavatories, stowage, first and business class seats, interior liners, etc.)

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$35.00-$40.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Cabinet Builder posted 12/30/1899
Ref No. 2130037669

Corporate Aircraft
Little Rock, AR
NO Tools Required

Job Duties

Skill: Cabinet Builder

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description: 

Fabricate aircraft cabinets and perform other functions that support the delivery of aircraft cabinets using cabinet construction skills in conformance with procedures and guidelines and to the standards of high quality. - Assemble and complete the most complex aircraft cabinet components at or above the expected standards of safety, quality, schedule and cost, using engineering and industrial definitions, procedures and guidelines that support the delivery to the aircraft for all aircraft models.

Job Qualifications

  • Cabinet builder, must have at least 5 years experience in builders cabinets for the aviation field.
  • Corporate aircraft strongly preferred
  • Own tools required
  • Must be willing to work overtime
  • Must be shift flexible
  • Must be able to read and comprehend English
  • High school diploma or general education degree GED required.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$12.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Painter posted 12/30/1899
Ref No. 2130037868

Military Aircraft
San Antonio, TX
NO Tools Required

Job Duties

San Antonio Manufacturing Center is seeking a painter for their Emergent Paint Center.

In this role the individual work assignments that will require them to mix paint, work with chemicals and all the preparation work required to prep the parts for paint application. This position will require them to work closely with other team members so the ability to work with others and share responsibilities is a desired attribute. This position will also require the ability to search and read the specifications in the DPS, engineering drawings to complete assignments given.

Position Responsibilities:

  • The Aircraft Painter coats surfaces of aircraft with paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper.
  • Smoothes surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and paint insignia, letters or numerals on aircraft surface, using stencils.


Paint Experience:

  • Relevant paint experience is considered painting multi-staged paint processes (base coat/clear coat) at large scale with compressed air (automobile, boat, etc.).
  • Adhesive Materials/Processes - Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc.) and processes.
  • Color Match - Knowledge of color space, color analysis, paint formulation, and paint application techniques to evaluate, match, and develop decorative finishes.
  • Engineering Drawings & Specs - Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
  • General Shop Processes - Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).
  • Materials & Processing - Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).
  • Organic Chemical Processing - Knowledge of organic chemical processes (such as top-coating, priming, surface cleaning).
  • Polymers & Composite Materials - Knowledge of po

Job Qualifications

Basic Qualifications (Required Skills/Experience):

  • 2+ years’ experience in the position responsibilities listed above
  • Experience reading blue prints and document specification
  • Ability to work rotating shift


Preferred Qualifications (Desired Skills/Experience):

  • 2+ years’ hands on experience sanding, taping, mixing material, the application of paint
  • 2+ years’ experience working on military and commercial platforms
  • 1+ years’ experience working with hazardous chemicals

 

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$32.74-$33.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Quality Inspector posted 12/30/1899
Ref No. 2130037821

Commuter
New Iberia, LA
Tools Required

Job Duties

  • Conduct inspections and surveillance of aircraft and communicate discrepancies by way of verbalization and written word.
  • Obtain access to aircraft internal areas by way of entry doors, access doors, access panels, and aircraft emergency exits.
  • Obtain access to aircraft external areas utilizing various aerial lifts including scissor lifts and articulate boom lifts
  • Work in awkward positions restricted by safety harness and other personal protective equipment (PPE).
  • Utilize mathematical skills and ability for balance calculations and critical measurements.
  • Demonstrate proficiency in all inspection methods, techniques, and equipment.
  • Conduct inspection and surveillance of the aircraft maintenance programs and communicate discrepancies by way of verbalization and written word.
  • Conduct inspections and surveillance of the aircraft facility and communicate discrepancies by way of verbalization and written word.
  • Ability to interpret blueprints and drawing and apply to aircraft.
  • Maintaining a clean and safe work area.

Job Qualifications

  • Current Airframe & Powerplant Certificate
  • Minimum 18 months experience as an A&P Mechanic in FAA Part 121 and/or 145.
  • Reading, writing, and basic arithmetic.
  • Shall be familiar with FAA regulations and procedures relative to the scope of normally assigned tasks.
  • Basic computer skills and ability to research customer maintenance manuals

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$30.00-$32.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Structures Mechanic posted 12/30/1899
Ref No. 2130037811

Commercial Aircraft
San Antonio, TX
NO Tools Required

Job Duties

  • No Tools required
  • Program is offering an assignment completion bonus of $10,000.00 (contingent upon completion/passing of training, obtaining access & 180 visits through the turnstile).

  • Tenured contractors are also eligible for another completion bonus at 180, 360, 540 etc. through the turnstile

  • Returning contractors who have already received a bonus are now eligible for this bonus.

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

  • Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
  • Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
  • Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
  • Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
  • Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
  • Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
  • A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
  • The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
  • Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
  • Maintain necessary certifications, licenses and permits as required for assigned work.
  • The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
  • Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays.
  • Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Job Qualifications

REQUIRED SKILLS/EXPERIENCE

  • Experience working as an aircraft structures mechanic
  • Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; Mission requirements and / or workload may require both scheduled and unscheduled overtime)

PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):

  • Currently possess an FAA A&P License or Military Technical School equivalent - (preferred/not required)
  • Computer skills experience including but not limited to: aircraft related systems and basic Microsoft Suite software (i.e. Word, Excel)
  • Experience reading and understanding engineering drawings, blueprints, schematics, and specifications

TYPICAL EDUCATION/EXPERIENCE:

  • High school diploma or GED and typically 3 or more years related experience or an equivalent combination of education and experience.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$35.00-$40.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Painter posted 12/30/1899
Ref No. 2130037761

General Aviation
Sandpoint, ID
NO Tools Required

Job Duties

Skill: Aircraft Painter

Duration: Long term

Location: Sandpoint, ID

Aircraft: Kodiak -General Aviation

Salary: please call Strom Aviation for compensation details (800) 743-8988  

Description of Responsibilites:

  • Mix primers and paints per the manufacturer’s recommendations.
  • Read and interpret job travelers, prints, and other instructions to prime and/or paint parts to meet Type Design requirements
  • Clean and maintain spray guns, work benches, and other equipment associated with the paint booth.

Job Qualifications

  • 2+ years of aviation painting experience
  • Must have aircraft experience
  • Experience in polishing and layout

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$30.00-$40.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Sheetmetal Tech posted 12/30/1899
Ref No. 2130037756

Commercial Aircraft
Farmers Branch, TX
Tools Required

Job Duties

Fabricate, assemble, install, and repair sheet metal parts by using products and processes which are varied but generally not complex in scope.

Must read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, epoxy resins, rubber and like materials.

Paint removal, metal forming, fastener use, disassembly/reassembly of mechanical components.

Corrosion removal and surface treatment.

Selects tooling and materials compatible with the processing techniques identified in the work instructions and documentation of repairs

Job Qualifications

  • A&P license preferred.
  • Ability to lift 50-75 pounds as needed, standing and bending for continuous periods of time.
  • Ability to follow written and oral instructions and read and implement instructions from OEM drawings (in English).
  • Experience with proper use of tools, torque wrench, equipment utilized in paint and corrosion removal, safety equipment (goggles, respirators, sanding booth), sheet metal tools for forming of aluminum (shears, brakes, rollers, wheels, shrinker/stretchers).
  • Ability to utilize manufacturer’s manual and blueprints to properly identify and install fasteners used in assembly operations.
  • Expertise in assembly and measuring devices/tools, corrosion types and removal techniques, and use of surface conversion coatings for spot treatment of bare metals.
  • Knowledge of repair station procedures and use of paperwork in relation to repair documentation.
  • 3-5 year’s on-the-job experience. Commercial aircraft experience a must.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$8.50-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Upholstery Tech posted 12/30/1899
Ref No. 2130037666

Corporate Aircraft
Little Rock, AR
NO Tools Required

Job Duties

Skill: Upholstery Tech

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Fabricate, develop, build, sew, and cover aircraft soft goods through the knowledge and skills of aircraft upholstery via completion 3d models, drawings, blueprints, IDEI drawings, and/or spec control prints following Quality standards. Soft goods include crew seats, passenger seats, divans, side ledges, headliners and other assorted interior soft goods.

Job Qualifications

  • Three years of aviation experience in upholstery
  • Shift Flexible
  • Ability to work independently  
  • Must have high school diploma or GED

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$12.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

A&P Mechanic posted 12/30/1899
Ref No. 2130037620

Regional Aircraft
Macon, GA
Tools Required

Job Duties

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Job Qualifications

Minimum of 10+ years experience in a MRO setting as an A&P Mechanic

Knowledge, Skills & Abilities:

  • Assignments require Standard Knowledge of a Technical Area.                                                                   
  • Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
  • Performs moderately complex Technical Assignments.                                                                                        
  • Assists Advanced Level Technicians on more complex technical assignments
  • Knowledge of machines and tools, including their uses, repairs and maintenance
  • Knowledge of principles and processes for providing customer service.
  • Skilled with repairing, troubleshooting, installing and equipment maintenance.
  • Knowledge of FAA requirements for aircraft maintenance procedures
  • Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.  

Working Conditions / Environment/  Special Requirements

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 "Respirator Protection" regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Tools must satisfy minimum tool list.
  • Valid Drivers License.
  • Must be able to work in hot/Cold – Indoor/Outdoor.
  • Must be able to lift up to 50 lbs unassisted.
  • Must be able to do work above head.
  • Must be able to work at heights.
  • Must be able to work in confined spaces.
  • Must be able to climb.

Education:  

  • High School/ GED
  • A & P License required

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$11.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Composite Technician posted 12/30/1899
Ref No. 2130037476

General Aviation
Sandpoint, ID
NO Tools Required

Job Duties

Under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment.

  • Manufacture composite aircraft parts to meet manufacturing specifications, in a team oriented work environment.
  • Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review.
  • Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations.
  • Check all work and ensure a defect free assembly prior to inspection.

Job Qualifications

  • 2-5 years experience in composites in the aviation industry
  • Familiar with the use of hand and power tools.  
  • Experience with reading blueprints .

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$40.00-$45.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Structural Assembler - Wings posted 12/30/1899
Ref No. 2130037475

General Aviation
Sandpoint, ID
NO Tools Required

Job Duties

Performs functions in a specific area of the production line, such as, assembling, fastening and installing parts on or for the aircraft.

Essential Duties and Responsibilities (other duties may be assigned):

  • Familiarization with the use of hand and power tools.
  • Must be able, or be trainable, to competently install solid rivets commonly used in the construction of aircraft and aircraft assemblies.
  • Experience with blueprint reading preferred.
  • Must be able to apply common sense understanding, carry out instructions, and demonstrate good analytical skills, alphanumeric accuracy and reading comprehension.
  • Ability to demonstrate high attention to detail and the ability to work quickly and thoroughly in a production environment.
  • Must be an excellent team player, be dependable, trustworthy and present self with professionalism.
  • The right individual will be teachable and willing to learn.

Job Qualifications

Qualifications:

  • Ideal candidates will be able to shoot blind rivets
  • High School diploma or GED required.
  • 2-5 years experience in aviation
  • Familiar with the use of hand and power tools.  
  • Experience with reading blueprints preferred.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$40.00-$45.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

A&P Mechanic posted 12/30/1899
Ref No. 2130037417

Regional Aircraft
Nashville, TN
Tools Required

Job Duties

Seeking A/P Mechanics in Nashville, TN -- Work will be performed on Regional Aircraft. 

  • Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications.
  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
     

Job Qualifications

  • 5+ Yrs of Experience at a  MRO facility preferred
  • Seeking CRJ, Embraer OR commercial experience with a stable work history. 

Education:  

  • High School/ GED
  • Current A&P required 

Working Conditions / Environment/  Special Requirements

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 "Respirator Protection" regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations

     

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$11.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Cabinet Builder Technician III posted 12/30/1899
Ref No. 2130037397

Corporate Aircraft
Indianapolis, IN
Tools Required

Job Duties

Skill: Cabinet Builder

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP Corporate

Salary: please call for compensation details (800) 743-8988

Job Description:

  • Fabricate high quality cabinetry, devan, ledges etc and other wood-surfaced subassemblies.
  • Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail.
  • Request material needs timely to ensure a continuous work flow.
  • Follows all department safety guidelines and ensure proper usage of tools and equipment.
  • Other duties as assigned but not covered herein.

Job Qualifications

  • 5+ years' experience in aviation as a cabinet builder
  • must be able to obtain airport badge
  • must have own tools
  • must be shift flexible
  • VIP experience highly preferred

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$20.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

AVIONICS posted 12/30/1899
Ref No. 2130037216

Commercial Aircraft
Tucson, AZ
Tools Required

Job Duties

Troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
• Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
• Operate ground support equipment as required
• Assist with mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Perform other duties as assigned
 

Job Qualifications

You have a minimum of 3+ years aircraft maintenance experience or substantiated equivalent experience
- You have the ability to interpret and work with mechanical engineering drawings
- You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
- You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
- You must obtain appropriate Ground Support Equipment Qualifications as required
- You have the ability to work unscheduled overtime including nonscheduled work days and holidays
- You have the ability to work in seasonal/inclement weather outside
- You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
- You have basic PC skills
Preferred Qualifications
- You have experience on corporate jet aircraft / commercial aircraft
- You have Bombardier aircraft model experience
- You have demonstrated the ability to train other employees

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$15.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Structures Technician posted 12/30/1899
Ref No. 2130036827

Commercial Aircraft
Tucson, AZ
Tools Required

Job Duties

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  •  Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  •  Assist in providing time estimates as required
  • Fabricate sheet and/or composite components


 

Job Qualifications

  • You have a minimum of 2 years of structural sheet metal repair / modification experience or substantiated similar experience
  • You have the ability to interpret and work with mechanical engineering drawing
  • You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
  • You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
  • You must obtain appropriate Ground Support Equipment Qualifications as required
  • You have the ability to work unscheduled overtime including nonscheduled work days and holidays
  • You have the ability to work in seasonal/inclement weather outside
  • You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
  • You have basic PC skills
  • You have minimum of 1 years of corporate / commercial jet experience

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$15.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

A&P Technician posted 12/30/1899
Ref No. 2130036826

Commercial Aircraft
Tucson, AZ
Tools Required

Job Duties

The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

  • Adhere to General Work Requirements
  • Comply with Environmental / Health / Safety policies and procedures.
  • Participate in 5-S activities
  • Perform all work in a safe and timely manner
  • Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment as required
  • Perform mechanical / electrical removals and installations
  • May assist with maintenance at off-site locations
  • Assist in providing time estimates
  • Assist in performing complex repairs on aircraft systems
  • Perform other duties as assigned

Job Qualifications

  • A & P Certificate
  • minimum of 3+ years aircraft maintenance experience or substantiated equivalent experience
  • ability to interpret and work with mechanical engineering drawings
  • ability to effectively communicate in both written and verbal form on individual and / or aircraft status
  • own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
  • must obtain appropriate Ground Support Equipment Qualifications as required
  • have the ability to work unscheduled overtime including nonscheduled work days and holidays
  • have the ability to work in seasonal/inclement weather outside
  • have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
  • have basic PC skills

Preferred Qualifications

  • have experience on corporate jet aircraft / commercial aircraft
  • have Bombardier aircraft model experience
  • have demonstrated the ability to train other employees

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$15.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

A&P Mechanic posted 12/30/1899
Ref No. 2130036706

Regional Aircraft
Macon, GA
Tools Required

Job Duties

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Job Qualifications

Minimum of 3 years experience in a MRO setting as an A&P Mechanic

Knowledge, Skills & Abilities:

  • Assignments require Standard Knowledge of a Technical Area.                                                                   
  • Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
  • Performs moderately complex Technical Assignments.                                                                                        
  • Assists Advanced Level Technicians on more complex technical assignments
  • Knowledge of machines and tools, including their uses, repairs and maintenance
  • Knowledge of principles and processes for providing customer service.
  • Skilled with repairing, troubleshooting, installing and equipment maintenance.
  • Knowledge of FAA requirements for aircraft maintenance procedures
  • Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.  

Working Conditions / Environment/  Special Requirements

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 "Respirator Protection" regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Tools must satisfy minimum tool list.
  • Valid Drivers License.
  • Must be able to work in hot/Cold – Indoor/Outdoor.
  • Must be able to lift up to 50 lbs unassisted.
  • Must be able to do work above head.
  • Must be able to work at heights.
  • Must be able to work in confined spaces.
  • Must be able to climb.

Education:  

  • High School/ GED
  • A & P License required

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$8.50-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

New Search