Job Information - Job #2130036116 Filled - Use Search for More Options (ID# 2130036116)

Oh no! It looks that job has already been filled! Please review our other listings for more opportunities.


Featured Job

Airframe and Powerplant Technician III posted 3/7/2024 Ref No. 2130037450

Equipment: Corporate Aircraft
Location: Kinston, NC

Essential functions

Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

  • Performs regular maintenance on aircraft.
  • Project Management; accurately estimates work time and materials for assigned tasks.
  • Fully analyzes all required blueprints, drawings, work orders and sketches to troubleshoot, repair and install desired product or part. Detects errors and corrects through proper departmental channels.
  • Ensures proper working condition of mechanical systems before flight.
  • Maintains records of maintenance, repairs, inspections, and any reports related to parts or services.
  • Inspects and examines engines, wings, propellers, tails, and other parts to identify cracks, corrosion, or other defects. 
  • Inspects hoses and lubricates joints; replaces any that show signs of needing repair. 
  • Consults maintenance manuals and specifications to identify correct operations and specifications for replacements or repairs.
  • Installs new parts to replace or repair defective or recalled parts or to enhance the performance of the aircraft; performs these tasks efficiently and to specifications. 
  • Repairs sheet metal as needed.
  • Ensures proper function of engines and operating systems via a variety of tests and tools. 
  • Identifies and resolves mechanical problems based on visual inspections or reports from pilot or crew. 
  • Performs other related duties as assigned.

Featured Job

Structures Technician posted 8/28/2023 Ref No. 2130036827

Equipment: Commercial Aircraft
Location: Tucson, AZ

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  •  Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  •  Assist in providing time estimates as required
  • Fabricate sheet and/or composite components


 

Featured Job

A&P Technician posted 8/28/2023 Ref No. 2130036826

Equipment: Commercial Aircraft
Location: Tucson, AZ

The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

  • Adhere to General Work Requirements
  • Comply with Environmental / Health / Safety policies and procedures.
  • Participate in 5-S activities
  • Perform all work in a safe and timely manner
  • Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment as required
  • Perform mechanical / electrical removals and installations
  • May assist with maintenance at off-site locations
  • Assist in providing time estimates
  • Assist in performing complex repairs on aircraft systems
  • Perform other duties as assigned

Featured Job

Structures Technician- NEW HIGHER RATE posted 8/28/2023 Ref No. 2130036825

Equipment: Commercial Aircraft
Location: Bridgeport, WV

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
  • Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  • Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  • Assist in providing time estimates as required
  • Fabricate sheet and/or composite components

Featured Job

A&P Mechanic NEW HIGHER RATE posted 8/28/2023 Ref No. 2130036824

Equipment: Commercial Aircraft
Location: Bridgeport, WV

 The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

  • Adhere to General Work Requirements
  • Comply with Environmental / Health / Safety policies and procedures.
  • Participate in 5-S activities
  • Perform all work in a safe and timely manner
  • Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment as required
  • Perform mechanical / electrical removals and installations
  • May assist with maintenance at off-site locations
  • Assist in providing time estimates
  • Assist in performing complex repairs on aircraft systems
  • Perform other duties as assigned
     

 

Featured Job

Cabinet Builder posted 6/21/2024 Ref No. 2130037669

Equipment: Corporate Aircraft
Location: Little Rock, AR

Skill: Cabinet Builder

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description: 

Fabricate aircraft cabinets and perform other functions that support the delivery of aircraft cabinets using cabinet construction skills in conformance with procedures and guidelines and to the standards of high quality. - Assemble and complete the most complex aircraft cabinet components at or above the expected standards of safety, quality, schedule and cost, using engineering and industrial definitions, procedures and guidelines that support the delivery to the aircraft for all aircraft models.

Featured Job

Helicopter A&P posted 6/21/2024 Ref No. 2130037411

Equipment: Helicopters
Location: Middletown, DE

Strom Aviation is currently seeking helicopter mechanics with Sikorsky S-76, S92, Bell or Agusta experience.  Need to be able to start ASAP 


The Helicopter Technician reports to the Maintenance Manager of Rotor Craft and is responsible for the installation, repair, modification and routine maintenance on aircraft as required; operates in compliance with company safety practices and performs other duties as assigned.

ESSENTIAL DUTIES AND RESPONSIBILITIES

  • Inspect, test, repair, maintain, and service aircraft.
  • Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  • Modify aircraft structures, space vehicles, systems, or components, following drawings, engineering orders and technical publications.
  • Examine and inspect engine or other components for cracks, breaks, or leaks.
  • Disassemble and inspect parts for wear, warping, or other defects.
  • Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
  • Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.
  • Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions.
  • Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  • Perform maintenance IAW FAA approved technical data.
  • Research FAA technical data to locate applicable data relevant to assigned tasks.

 

Featured Job

Assembler C - Cabin Interior Specialist posted 6/19/2024 Ref No. 2130037830

Equipment: Military Aircraft
Location: San Antonio, TX

Seeking Aircraft Cabin Interior Specialists to support the Interior Repair Team based out San Antonio, Tx.

This position will perform decorative interior repair in the aircraft cabin on assemblies made from various types of material including fiberglass, plastic and composites using various methods, including but not limited to painting and sweep and fill. This job is performed at various stages of the aircraft assembly process, in factory and/or flight line locations.

Position Responsibilities:

  • Ability to read and understand engineering drawings and instructions to select correct parts, materials, tools, assemblies, standards, and hardware used to install, fit, fasten, align, adjust and perform the necessary per-installation and installation of interiors.
  • Understanding of proper cleaning methods, surface preparation, cleaning, and masking for rework.
  • Majority of responsibility is for non-baseline work requiring interpretation of established processes and instructions to troubleshoot and develop solutions to complex non-standard work.
  • Work independently with limited direction from lead and manager.
  • Report and work to resolve job constraints including but not limited to errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Boeing procedures.
  • Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards.
  • Maintain clean, neat, organized and FOD free work area.
  • Possess understanding and knowledge of basic computer systems and programs.
  • Ability to correspond with internal teams and external suppliers and customers with dignity, respect and integrity while exhibiting our values at all times.
  • Ability to perform the following requirements:
  • Rotation of head/neck, bending and twisting at the waist, walking, standing, kneeling, crouching, climbing/balancing, flexion/extension, lifting and carrying less than 35 pounds, contact with liquid coatings, plastics, sealants and solvents, exposure to noise, and the use of personal safety gear for face, eyes, hand/arm, and ears.
  • There will also be a requirement to work in elevated and/or confined spaces in indoor temperature-controlled environments as well as outdoor open environments.

Featured Job

Structures Mechanic posted 6/11/2024 Ref No. 2130037811

Equipment: Commercial Aircraft
Location: San Antonio, TX

  • No Tools required
  • Program is offering an assignment completion bonus of $10,000.00 (contingent upon completion/passing of training, obtaining access & 180 visits through the turnstile).

  • Tenured contractors are also eligible for another completion bonus at 180, 360, 540 etc. through the turnstile

  • Returning contractors who have already received a bonus are now eligible for this bonus.

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

  • Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
  • Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
  • Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
  • Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
  • Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
  • Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
  • A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
  • The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
  • Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
  • Maintain necessary certifications, licenses and permits as required for assigned work.
  • The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
  • Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays.
  • Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Featured Job

Sheetmetal Tech posted 5/24/2024 Ref No. 2130037756

Equipment: Commercial Aircraft
Location: Farmers Branch, TX

Fabricate, assemble, install, and repair sheet metal parts by using products and processes which are varied but generally not complex in scope.

Must read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, epoxy resins, rubber and like materials.

Paint removal, metal forming, fastener use, disassembly/reassembly of mechanical components.

Corrosion removal and surface treatment.

Selects tooling and materials compatible with the processing techniques identified in the work instructions and documentation of repairs

Featured Job

Flightline Mechanic posted 5/14/2024 Ref No. 2130037718

Equipment: Military Aircraft
Location: San Antonio, TX

Duties will include, but not limited to:

  • Perform efforts associated with flight controls installation, removal and rigging. Landing gear and servicing of aircraft
  • Perform essential component change outs for example servo pumps, filters and engine components
  • Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
  • The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
  • Maintain necessary certifications, licenses and permits as required for assigned work.
  • Will assist and train less senior employees.
  • Required to lead teams through more complex aircraft relevant tasks.
  • Able to prioritize workload to maintain schedules on assigned projects.
  • Ensure that all equipment is used in accordance with established safety and operating procedures.
  • Diagnose and correct malfunctions occurring in assembly processes.
  • Use any and all precision measuring instruments, gauges, tools, etc., necessary to check dimensions and conformance to quality requirements.
  • Maintain necessary certifications, licenses and permits as required for assigned work.
  • Able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
  • Able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime
  • Must be familiar with Hazardous Energy and Lock Out /Tag systems applications to ensure working environment is deemed safe for access and on the job performance.
  • Will be required to assist other team members (Avionics, Structures, Electrics) in order to ensure cost/schedule targets are met.

Featured Job

Cabinet Finisher posted 4/30/2024 Ref No. 2130037668

Equipment: Corporate Aircraft
Location: Little Rock, AR

Skill: Cabinet Finisher

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: Please call Strom Aviation for compensation details (800) 743-8988

Description:

The Cabinet Finisher/Painter will work with the finish coating process for VIP aircraft cabinets and perform other functions that support the delivery of aircraft cabinets using personal skills in conformance with procedures and guidelines and to the standards of our client’s quality.  Need experience doing squawks, sanding or stripping metal or composite surfaces for the application of primer

Featured Job

Upholstery Tech posted 4/30/2024 Ref No. 2130037666

Equipment: Corporate Aircraft
Location: Little Rock, AR

Skill: Upholstery Tech

Duration: 3+ months (open ended)

Location: Little Rock AR

Aircraft: Falcon Jet

Salary: please call Strom Aviation for compensation details (800) 743-8988

Description:

Fabricate, develop, build, sew, and cover aircraft soft goods through the knowledge and skills of aircraft upholstery via completion 3d models, drawings, blueprints, IDEI drawings, and/or spec control prints following Quality standards. Soft goods include crew seats, passenger seats, divans, side ledges, headliners and other assorted interior soft goods.

Featured Job

A&P Mechanic posted 4/23/2024 Ref No. 2130037620

Equipment: Regional Aircraft
Location: Macon, GA

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Featured Job

Avionics Technician posted 4/22/2024 Ref No. 2130037612

Equipment: Helicopters
Location: Middletown, DE

Avionics Technician for FAA 145 repair station troubleshoot avionic systems, checkout equipment knowledge and box level knowledge helpful. Experience in Beechcraft King Air, Bell, Sikorsky, Eurocopters & Pilatus PC-12 exp. preferred.

  • Long Term Work
  • Great Work Environment
  • Quick Feedback on resumes
  • Quick Starts

 

 

Featured Job

Avionics Technician posted 4/22/2024 Ref No. 2130037611

Equipment: Helicopters
Location: Middletown, DE

Avionics Technician for FAA 145 repair station troubleshoot avionic systems, checkout equipment knowledge and box level knowledge helpful. Experience in Beechcraft King Air, Bell, Sikorsky, Eurocopters & Pilatus PC-12 exp. preferred.

  • Long Term Work
  • Great Work Environment
  • Quick Feedback on resumes
  • Quick Starts

 

 

Featured Job

A&P Mechanic posted 2/27/2024 Ref No. 2130037417

Equipment: Regional Aircraft
Location: Nashville, TN

Seeking A/P Mechanics in Nashville, TN -- Work will be performed on Regional Aircraft. 

  • Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications.
  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
     

Featured Job

Cabinet Builder Technician III posted 2/22/2024 Ref No. 2130037397

Equipment: Corporate Aircraft
Location: Indianapolis, IN

Skill: Cabinet Builder

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP Corporate

Salary: please call for compensation details (800) 743-8988

Job Description:

  • Fabricate high quality cabinetry, devan, ledges etc and other wood-surfaced subassemblies.
  • Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail.
  • Request material needs timely to ensure a continuous work flow.
  • Follows all department safety guidelines and ensure proper usage of tools and equipment.
  • Other duties as assigned but not covered herein.

Featured Job

A&P Mechanic posted 7/24/2023 Ref No. 2130036706

Equipment: Regional Aircraft
Location: Macon, GA

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.


Job Alert Banner

Search...

Clear Search Criteria

Jobs for...

View JobView Job