Job Information - Job #2130034993 Filled - Use Search for More Options (ID# 2130034993)

Job Duties

• Health Insurance
• Holiday Pay
• Longevity Bonus
• 401K Programs

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
• Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
• Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
• Assist in providing time estimates as required
• Fabricate sheet and/or composite components

Job Qualifications

• You have a minimum of 2 years of structural sheet metal repair / modification experience or substantiated similar experience
• You have the ability to interpret and work with mechanical engineering drawing
• You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
• You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
• You must obtain appropriate Ground Support Equipment Qualifications as required
• You have the ability to work unscheduled overtime including nonscheduled work days and holidays
• You have the ability to work in seasonal/inclement weather outside
• You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
• You have basic PC skills
• You have minimum of 1 years of corporate / commercial jet experience
• You have the demonstrated ability to train other employees

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$13.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

 The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements
• Comply with Environmental / Health / Safety policies and procedures.
• Participate in 5-S activities
• Perform all work in a safe and timely manner
• Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
• Perform and document work performed per appropriate manuals and regulations as required
• Operate ground support equipment as required
• Perform mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Assist in providing time estimates
• Assist in performing complex repairs on aircraft systems
• Perform other duties as assigned
   

Job Qualifications

• You have an A & P Certificate
• You have a minimum of 3 years aircraft maintenance experience or substantiated equivalent experience
• You have the ability to interpret and work with mechanical engineering drawings
• You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
• You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
• You must obtain appropriate Ground Support Equipment Qualifications as required
• You have the ability to work unscheduled overtime including nonscheduled work days and holidays
• You have the ability to work in seasonal/inclement weather outside
• You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
• You have basic PC skills
• You have experience on corporate jet aircraft / commercial aircraft
• You have Bombardier aircraft model experience
• You have demonstrated the ability to train other employees

Our client is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by Federal, National, or Local Laws.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$13.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

• Perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical area
• Locate blind holes necessary for installation of new structural items to existing structure
• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes
• Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair
• Use tooling assemblies and fixtures for depot level modification and repair of structural parts
• Knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components
• Knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems
• Knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc.
• Access aircraft data via computer systems and initiate on-line parts and discrepancy requests
• Maintain necessary certifications, licenses and permits as required for assigned work
• Ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds
• Ensure working environment is deemed safe for access and job task performance via Hazardous Energy and Lock Out /Tag systems applications
• Assist other team members (General Mechanics, Avionics, Electronics) to ensure cost/schedule targets are met
• The position requires the ability to pass an assessment at the end of training cycle
• The position requires compliance to SA Site Tool and FOD procedure

Job Qualifications

• This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
• 4+ years of experience working with non-porous metals, such as aluminum, titanium, and stainless
• 4+ years of experience working with schematics, specifications, assembly drawings and standard operating procedures
• 4+ years of experience using structures hand tools such as: drills 45 and 90 degrees, pancake adapters, counter sink cages, hole finders, and rivet guns
• 4+ years of experience working heavy structures: locating, drilling, countersinking and fastening structures (i.e.. doublers, stringers, webs, seat tracks, etc.) to aircraft
• Ability to work variable shifts (i.e. scheduled and unscheduled overtime; weekends and holidays) to support mission requirements and workload

Preferred Skills:

• Experience in aircraft heavy maintenance (JAWACS or Depot Level)
• Ability to operate a forklift, mobile crane, and riding type electric powered elevating equipment

Typical Experience/Education:

• High school diploma or GED and typically 4+ years related experience or an equivalent combination of education and experience.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$33.00-$43.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

Fabricate, assemble, install, and repair sheet metal parts by using products and processes which are varied but generally not complex in scope.

Must read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, epoxy resins, rubber and like materials.

Paint removal, metal forming, fastener use, disassembly/reassembly of mechanical components.

Corrosion removal and surface treatment.

Selects tooling and materials compatible with the processing techniques identified in the work instructions and documentation of repairs

Job Qualifications

• A&P license preferred.
• Ability to lift 50-75 pounds as needed, standing and bending for continuous periods of time.
• Ability to follow written and oral instructions and read and implement instructions from OEM drawings (in English).
• Experience with proper use of tools, torque wrench, equipment utilized in paint and corrosion removal, safety equipment (goggles, respirators, sanding booth), sheet metal tools for forming of aluminum (shears, brakes, rollers, wheels, shrinker/stretchers).
• Ability to utilize manufacturer’s manual and blueprints to properly identify and install fasteners used in assembly operations.
• Expertise in assembly and measuring devices/tools, corrosion types and removal techniques, and use of surface conversion coatings for spot treatment of bare metals.
• Knowledge of repair station procedures and use of paperwork in relation to repair documentation.
• 3-5 year’s on-the-job experience. Commercial aircraft experience a must.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$8.50-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

Troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
• Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
• Operate ground support equipment as required
• Assist with mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Perform other duties as assigned
 

Job Qualifications

You have a minimum of 3+ years aircraft maintenance experience or substantiated equivalent experience
- You have the ability to interpret and work with mechanical engineering drawings
- You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
- You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
- You must obtain appropriate Ground Support Equipment Qualifications as required
- You have the ability to work unscheduled overtime including nonscheduled work days and holidays
- You have the ability to work in seasonal/inclement weather outside
- You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
- You have basic PC skills
Preferred Qualifications
- You have experience on corporate jet aircraft / commercial aircraft
- You have Bombardier aircraft model experience
- You have demonstrated the ability to train other employees

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$15.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

Skill: Cabinet Builder

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP Corporate

Salary: please call for compensation details (800) 743-8988

Job Description:

• Fabricate high quality cabinetry, devan, ledges etc and other wood-surfaced subassemblies.
• Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail.
• Request material needs timely to ensure a continuous work flow.
• Follows all department safety guidelines and ensure proper usage of tools and equipment.
• Other duties as assigned but not covered herein.

Job Qualifications

• 3+ years' experience in aviation as a cabinet builder
• must be able to obtain airport badge
• must have own tools
• must be shift flexible
• VIP experience highly preferred

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$15.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

• Performs regular maintenance on aircraft.
• Project Management; accurately estimates work time and materials for assigned tasks.
• Fully analyzes all required blueprints, drawings, work orders and sketches to troubleshoot, repair and install desired product or part. Detects errors and corrects through proper departmental channels.
• Ensures proper working condition of mechanical systems before flight.
• Maintains records of maintenance, repairs, inspections, and any reports related to parts or services.
• Inspects and examines engines, wings, propellers, tails, and other parts to identify cracks, corrosion, or other defects. 
• Inspects hoses and lubricates joints; replaces any that show signs of needing repair. 
• Consults maintenance manuals and specifications to identify correct operations and specifications for replacements or repairs.
• Installs new parts to replace or repair defective or recalled parts or to enhance the performance of the aircraft; performs these tasks efficiently and to specifications. 
• Repairs sheet metal as needed.
• Ensures proper function of engines and operating systems via a variety of tests and tools. 
• Identifies and resolves mechanical problems based on visual inspections or reports from pilot or crew. 
• Performs other related duties as assigned.
• Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

Job Qualifications

• Primary aircraft: Citation CJ3, CJ3+, Citation Excel, Citation XLS, Citation Sovereign, Citation X, Challenger 350, Gulfstream GIV-SP. 
• Airframe and Powerplant certification by the FAA required
• Must have 7+ years of corporate aircraft experience
• Extensive knowledge of all aircraft mechanical systems functions and interactions.
• Thorough working knowledge of all current FAA regulations, IPM and ATA codes.
• Prior MRO environment experience preferred  
• Prior 135 operations experience.
• Expert on Aircraft Systems
• Knowledge of system components, controls, and operations

Workshop Practices

• Proven knowledge of advanced tool usage and maintenance to include usage of rig boards (Flight Controls) and Engine Rigging
• Proven experience in mentoring Tech 1 and 2’s and the ability to tech in a classroom environment, if necessary, along with filling in for a Lead Tech if needed.
• Thorough and proven knowledge of proper documentation and work order procedures (prior experience with corridor is a plus)
• Expert with tech data knowing the location and correct reference use / CMM (ask them what a CMM is and what is the purpose of a CMMs.)

Examples of Technical Data:

• Aircraft Maintenance Manuals
• Structural Repair Manuals
• Component Maintenance Manuals
• Service Bulletins (SB) and Airworthiness Directives (AD)

Examples of correct Reference Use:

• Understanding CMMs - These components can include various parts such as avionics, engines, landing gear, hydraulics, and other systems.
• Adherence to Manual Procedures
• Troubleshooting Skills

Component Maintenance:

• Know how to perform an Engine run and is taxi certified.
• Knowledge of Control cable replacing
• Engine rigging

Troubleshooting Basics:

• Expert level troubleshooting techniques for complex system malfunctions.
• Expert with diagnostic tools and equipment i.e. ohmmeter, megger

System Inspections:

• Can perform functional checks.
• Can perform routine inspections for different aircraft systems.
• Expert level understanding on understanding inspection checklists, documentation, and reporting to include pre and post inspection items.

MOST IMPORTANT Documentation and Record Keeping:

• Understands and performs accurate documentation and record-keeping practices.
• Maintains compliance with maintenance records, logbooks, and regulatory requirements.
• Record Keeping (referencing the correct sections of technical manuals for traceability and future reference.)
• Compliance with Regulations (They must be proficient in cross-referencing technical data to meet regulatory requirements.)

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$8.50-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

• Performs regular maintenance on aircraft.
• Project Management; accurately estimates work time and materials for assigned tasks.
• Fully analyzes all required blueprints, drawings, work orders and sketches to troubleshoot, repair and install desired product or part. Detects errors and corrects through proper departmental channels.
• Ensures proper working condition of mechanical systems before flight.
• Maintains records of maintenance, repairs, inspections, and any reports related to parts or services.
• Consults maintenance manuals and specifications to identify correct operations and specifications for replacements or repairs.
• Installs new parts to replace or repair defective or recalled parts or to enhance the performance of the aircraft; performs these tasks efficiently and to specifications. 
• Repairs sheet metal as needed.
• Ensures proper function of engines and operating systems via a variety of tests and tools. 
• Identifies and resolves mechanical problems based on visual inspections or reports from pilot or crew. 
• Performs other related duties as assigned.

Job Qualifications

Required education and experience

• High school diploma or equivalent required
• Airframe and Powerplant certification by the FAA required
• 0-3 years of general work experience.
• Possesses a basic understanding of general aspects of the job, knowledge of all aircraft mechanical systems functions and interactions.
• Working knowledge of all current FAA regulations, IPM and ATA codes.
• Must pass a pre-employment drug test. Ongoing employment requires participating and complying with the Anti-Drug and Alcohol Misuse Prevention Program which includes random testing.

Preferred education and experience

• It's preferred that you have at least three years of experience with corporate jets or show that you have the knowledge and skills needed to do the job.
• Corridor experience preferred.

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$30.00-$35.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

The A&P Technician troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

• Adhere to General Work Requirements
• Comply with Environmental / Health / Safety policies and procedures.
• Participate in 5-S activities
• Perform all work in a safe and timely manner
• Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
• Perform and document work performed per appropriate manuals and regulations as required
• Operate ground support equipment as required
• Perform mechanical / electrical removals and installations
• May assist with maintenance at off-site locations
• Assist in providing time estimates
• Assist in performing complex repairs on aircraft systems
• Perform other duties as assigned

Job Qualifications

• A & P Certificate
• minimum of 3+ years aircraft maintenance experience or substantiated equivalent experience
• ability to interpret and work with mechanical engineering drawings
• ability to effectively communicate in both written and verbal form on individual and / or aircraft status
• own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
• must obtain appropriate Ground Support Equipment Qualifications as required
• have the ability to work unscheduled overtime including nonscheduled work days and holidays
• have the ability to work in seasonal/inclement weather outside
• have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
• have basic PC skills

Preferred Qualifications

• have experience on corporate jet aircraft / commercial aircraft
• have Bombardier aircraft model experience
• have demonstrated the ability to train other employees

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$15.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.

Job Duties

• Health Insurance
• Holiday Pay
• Longevity Bonus
• 401K Programs

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
•  Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
•  Assist in providing time estimates as required
• Fabricate sheet and/or composite components

Job Qualifications

• You have a minimum of 2 years of structural sheet metal repair / modification experience or substantiated similar experience
• You have the ability to interpret and work with mechanical engineering drawing
• You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
• You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
• You must obtain appropriate Ground Support Equipment Qualifications as required
• You have the ability to work unscheduled overtime including nonscheduled work days and holidays
• You have the ability to work in seasonal/inclement weather outside
• You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
• You have basic PC skills
• You have minimum of 1 years of corporate / commercial jet experience

Facility Description

Benefits

As an employee of Strom Aviation, you will receive benefits including holiday pay, longevity pay, access to a 401K program and insurance coverage (medical, dental, life, disability).  We offer travel pay, bonuses, and other incentives for some positions as well.  A referral is the best compliment we can get, and Strom Aviation offers 2 different referral programs for our employees.                 

Our recruiters strive to connect qualified individuals with opportunities. With hundreds of jobs across the nation, Strom offers opportunities no matter where you are. 

Pay

$15.00-$50.00
**Please check with recruiter to see if you qualify for per diem, travel pay, or numerous bonuses. These items vary by job.