Job Information - Job #2130031732 Filled - Use Search for More Options (ID# 2130031732)

Oh no! It looks that job has already been filled! Please review our other listings for more opportunities.


Featured Job

Structures Mechanic posted 7/27/2021 Ref No. 2130032189

Equipment: Heavy
Location: San Antonio, TX

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Duties may include, but are not limited to:

  • Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
  • Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
  • Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
  • Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
  • Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.

Featured Job

Avionics Technician posted 7/22/2021 Ref No. 2130032723

Equipment: Heavy
Location: Denver, CO

Avionics Technicians for project on new aircraft...

  • Wire routing
  • Wire terminations,
  • Ring out checks
  • Avionics electrical system troubleshooting
  • Cockpit avionics install

Featured Job

A/P - - CH-47 Mechanic posted 7/19/2021 Ref No. 2130032689

Equipment: Military Helicopter
Location: Middletown, DE

  • Looking for prior military experience in Rotary Wing.
  • Will be doing Induction and Maintenance on the CH-47 helicopters.
  • Will be removing parts and acting as mechanic helpers during the duration.
  • Inspect, test, repair, maintain, and service aircraft. Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  • Examine and inspect engine or other components for cracks, breaks, or leaks.
  • Disassemble and inspect parts for wear, warping, or other defects.
  • Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
  • Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.
  • Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions.
  • Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  • Perform maintenance IAW FAA approved technical data. Research FAA technical data to locate applicable data relevant to assigned tasks.

Featured Job

Structures Mechanic posted 7/19/2021 Ref No. 2130032680

Equipment: Heavy
Location: San Antonio, TX

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

• Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
• Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
• Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
• A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
• The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
• Maintain necessary certifications, licenses and permits as required for assigned work.
• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Featured Job

Cabinet Builder posted 7/16/2021 Ref No. 2130032675

Equipment: Corporate
Location: St. Louis, MO

As a Cabinet Maker, you will also be responsible for:

  • Repairing, modifying, refurbishing, and fabricating aircraft cabinetry, as well as stripping and re-covering cabinetry with new veneer or laminate.
  • Calculating weight & balance data.
  • Fabricating, assembling and installing cabinetry using engineering blueprints and spec drawings.
  • Maintaining a safe and clean work environment by following guidelines and procedures in compliance with all applicable regulations.

Featured Job

Cabinet Finisher posted 7/16/2021 Ref No. 2130032658

Equipment: Corporate
Location: St. Louis, MO

As a Cabinet Finisher, you will also be responsible for:

  • Establish the highest quality of the work performed on aircraft cabinets, and components undergoing work and specialized services meets Company standards and goals that in turn meets or improves budgeted hours/schedules.
  • A wide and comprehensive familiarity with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered.
  • Use of strong mathematical knowledge to accurately measure complete project ensuring quality and precision.
  • Collaborate with department Crew Lead(s) to troubleshoot application, prepped surface, and finish discrepancies.  Following and working from approved engineering drawings as well as other written instructions and design specifications.
  • Ability to execute any step within the finishing process to complete the monument.
  • Utilize the methods set forth by the company’s Repair Station and Quality Control Manual(s).

Featured Job

Cabinet Builder Technician III posted 5/12/2021 Ref No. 2130032279

Equipment: Corporate
Location: Indianapolis, IN

Skill: Cabinet Builder

Duration: 6+ months

Location: Indianapolis IN

Aircraft: VIP Corporate

Salary: please call for compensation details (800) 743-8988

Job Description:

  • Fabricate high quality cabinetry, devan, ledges etc and other wood-surfaced subassemblies.
  • Interpret material specs and engineering drawings to ensure finished product meets the design spec, with a high level of quality and detail.
  • Request material needs timely to ensure a continuous work flow.
  • Follows all department safety guidelines and ensure proper usage of tools and equipment.
  • Other duties as assigned but not covered herein.

Featured Job

A&P Mechanic-fixed wing posted 4/29/2021 Ref No. 2130032214

Equipment: General Aviation
Location: Middletown, DE

  • Fixed Wing A&P mechanics with King Air, and Small GA experience for GA. (With Tool Box)  Must have 5 Yrs of A&P experience.  Need to be able to start ASAP 

    POSITION SUMMARY:
    This position reports to the Maintenance Manager and is responsible for the installation, repair, modification and routine maintenance on aircraft as required; operates in compliance with company safety practices and performs other duties as assigned.

    ESSENTIAL DUTIES AND RESPONSIBILITIES

  • Inspect, test, repair, maintain, and service aircraft.
  • Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  • Modify aircraft structures, space vehicles, systems, or components, following drawings, engineering orders and technical publications.
  • Examine and inspect engine or other components for cracks, breaks, or leaks.
  • Disassemble and inspect parts for wear, warping, or other defects.
  • Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
  • Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.
  • Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions.
  • Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  • Perform maintenance IAW FAA approved technical data.
  • Research FAA technical data to locate applicable data relevant to assigned tasks.

 

Featured Job

Helicopter A&P Mechanic posted 2/16/2021 Ref No. 2130031690

Equipment: Helicopter
Location: Middletown, DE

  • Strom Aviation is currently seeking helicopter mechanics with Sikorsky S-76/92 experience or Bell / Agusta Westland / Leondardo Experience.  Must have 5 Yrs of A&P experience.  Need to be able to start ASAP 

    POSITION SUMMARY:
    The Helicopter Technician reports to the Maintenance Manager of Rotor Craft and is responsible for the installation, repair, modification and routine maintenance on aircraft as required; operates in compliance with company safety practices and performs other duties as assigned.

    ESSENTIAL DUTIES AND RESPONSIBILITIES

  • Inspect, test, repair, maintain, and service aircraft.
  • Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  • Modify aircraft structures, space vehicles, systems, or components, following drawings, engineering orders and technical publications.
  • Examine and inspect engine or other components for cracks, breaks, or leaks.
  • Disassemble and inspect parts for wear, warping, or other defects.
  • Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
  • Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.
  • Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions.
  • Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  • Perform maintenance IAW FAA approved technical data.
  • Research FAA technical data to locate applicable data relevant to assigned tasks.

 


Job Alert Banner

Search...

Clear Search Criteria

Jobs for...