Job Information - Job #2130031604 Filled - Use Search for More Options (ID# 2130031604)

Performs avionics and electrical systems maintenance according to FCC, FAA and Company Policies and Regulations. Troubleshoots, tests, repairs and installs avionics components such as aircraft communication, navigation, radar and electronic instrument systems. Operates and maintains test equipment and trade associated tools.

JOB RESPONSIBILITIES

• Performs routine or special maintenance inspections to prevent failure of aircraft electrical and avionic systems and components; performs complete operational and functional checks on navigation, communication and flight control systems, including instrumentation and pilot static installations, etc.  Fabricates wiring harnesses, installs/modifies avionic and electrical systems.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme and quantity and type of parts needed to accomplish proper repair; secures same from Stores or departmental supplies.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Inspects completed work before sign off to identify any needed rework and performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping off after finishing all designated operations.
• Performs installation of digital avionic equipment.
• Interprets avionic/electrical wiring diagrams, wire identification, harness fabrication, wiring and cable integrity, coax cables and fittings and connector assemblies.
• Adjusts, repairs, or replaces malfunctioning components or assemblies, using hand tools and soldering iron.
• Installs electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, and soldering iron.
• Interprets flight test data to diagnose malfunctions and systemic performance problems.
• Sets up and operates ground support and test equipment to perform functional flight test of electrical and electronic systems.
• Tests components or assemblies, using circuit tester, oscilloscope, and voltmeter.
• Trouble shoots, repairs, reworks, and modifies worn or defective assemblies, components or systems.

Seeking A&P mechanics in Macon, GA

• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
• Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Consults the Maintenance Lead if technical assistance is needed during the repair process.
• Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping after finishing all designated operations.
• Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
• Provides supervisor with performance statistics and other operational data, as requested.
• Properly accounts for time and materials used in all inspection and maintenance activities.
• Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

• Establish the highest quality of the work performed on aircraft cabinets, and components undergoing work and specialized services meets Company standards and goals that in turn meets or improves budgeted hours/schedules.
• A wide and comprehensive familiarity with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered.
• Use of strong mathematical knowledge to accurately measure complete project ensuring quality and precision.
• Collaborate with department Crew Lead(s) to troubleshoot application, prepped surface, and finish discrepancies. 
• Following and working from approved engineering drawings as well as other written instructions and design specifications.
• Ability to execute any step within the finishing process to complete the monument.
• Utilize the methods set forth by the company’s Repair Station and Quality Control Manual(s).

Strom Aviation is currently seeking Sheetmetal mechanics in Middletown, DE.  Candidates will be on the CH-47 side and will be doing repairs and modifications.  

Job Description:

• Performs work as outlined in work orders timely and signs when work is completed. 
• Notify his supervisor immediately of any condition that may arise that could present him with problems of parts, materials, airworthiness, workmanship or schedule.
• Coordinates with the Designated Inspector when a progressive inspection is to take place and notifies the Designated Inspector prior to closing a given area or for final inspection.
• Performs work with sufficient hand tools to perform assigned duties which include assemble, install, and connect parts, fittings, and assemblies on aircraft, using layout tools, hand tools, power tools, and fasteners such as bolts, screws, rivets, and clamps.
• Continuously abreast of current technical maintenance standards and methods.
• Uses current revision of technical data when performing work and include such data in the work order file.
• Uses only serviceable or new parts when accomplishing work on airframe, engine and components.
• Completes parts/components requisitions accurately and timely including proper part number, quantity, work order and operation be announced for parts traceability, to meet scheduled delivery of aircraft or other components.
• Responsible in keeping work area clean and in an orderly manner.
• Ensures that appropriate maintenance manual, repair and inspection procedures, service bulletins and letters or other data as appropriate for work accomplished are included as part of the work order.
• Ensures work order discrepancy corrective action is adequate for work accomplished.
• Notifies supervisor of any tasks performed which should be documented in the On The Job Training (OJT) record.
• Ensure that all equipment/components removed for repair and/or to gain access are properly documented, tagged and identified on appropriate forms as outlined in RSM.
• Ensure that parts/components as received from the parts department are accompanied by the applicable forms.
• Ensure that parts/components as received from the parts department that could possibly require a “Core Return” are acknowledged and that the core is returned to the stock room in a timely manner.

Strom Aviation has a need for 2 A&P Mechanics for a contract position in Middletown, DE. 

• Inspect, test, repair, maintain, and service aircraft. Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine and inspect engine or other components for cracks, breaks, or leaks.
• Disassemble and inspect parts for wear, warping, or other defects.
• Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions. Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. Perform maintenance IAW FAA approved technical data. Research FAA technical data to locate applicable data relevant to assigned tasks.

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
• Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
• Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
• Assist in providing time estimates as required
• Fabricate sheet and/or composite components

• Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
• Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
• Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
• Remove / install aircraft components as required
• Fabricate and or modify structural modifications on aircraft part
• Perform minor structural repairs on composite components either attached or detached
• Assist in conducting hidden damage inspection of aircraft structures
• Assist with complex structural repairs either on or off aircraft
• Operate ground support equipment as required
• Assist with aircraft component repair
• Perform mechanical / electrical removals and installations as required
• May assist with maintenance at off-site locations
• Assist in wing removal as required
• Assist maintenance as required
•  Inspect confined areas of airframe
• Assist in designing, modifying and welding metal fixtures as required
•  Assist in providing time estimates as required
• Fabricate sheet and/or composite components