Job Information - Job #2130031575 Filled - Use Search for More Options (ID# 2130031575)

Oh no! It looks that job has already been filled! Please review our other listings for more opportunities.


Featured Job

Avionics Technician posted 3/1/2021 Ref No. 2130031881

Equipment: Heavy
Location: Louisiana, LA

  • Installs, tests, troubleshoots and repairs aircraft avionics and electrical system components in accordance with testing, engineering, maintenance and installation directives.
  • High School diploma or equivalent with at least 4 years clearance relevant experience required. 
  • Able to wear respirator or other safety gear
  • Ability to understand and follow instructions and guidelines

Featured Job

A&P Mechanic posted 2/22/2021 Ref No. 2130031845

Equipment: Regional Airlines
Location: Nashville, TN

Seeking A/P Mechanics in Nashville, TN -- Work will be performed on Regional Aircraft. 

  • Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer's specifications.
  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
     

Featured Job

Helicopter A&P Mechanic posted 2/16/2021 Ref No. 2130031690

Equipment: Helicopter
Location: Middletown, DE

  • Strom Aviation is currently seeking helicopter mechanics with Sikorsky S-76/92 experience or Bell / Agusta Westland / Leondardo Experience.  Must have 5 Yrs of A&P experience.  Need to be able to start ASAP 

    POSITION SUMMARY:
    The Helicopter Technician reports to the Maintenance Manager of Rotor Craft and is responsible for the installation, repair, modification and routine maintenance on aircraft as required; operates in compliance with company safety practices and performs other duties as assigned.

    ESSENTIAL DUTIES AND RESPONSIBILITIES

  • Inspect, test, repair, maintain, and service aircraft.
  • Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  • Modify aircraft structures, space vehicles, systems, or components, following drawings, engineering orders and technical publications.
  • Examine and inspect engine or other components for cracks, breaks, or leaks.
  • Disassemble and inspect parts for wear, warping, or other defects.
  • Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
  • Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.
  • Test engine and system operations, using testing equipment, and listens to engine sounds to detect and diagnose malfunctions.
  • Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  • Perform maintenance IAW FAA approved technical data.
  • Research FAA technical data to locate applicable data relevant to assigned tasks.

 

Featured Job

CH47 /UH-60 Quality Inspector posted 2/16/2021 Ref No. 2130031808

Equipment: Military Helicopter
Location: Middletown, DE

Helicopter Inspector is responsible for performing inspections on H-60, CH-47 and various fixed wing aircraft series as required; performs functions as a Designated Inspector and operates in compliance with company safety practices and performs other duties as assigned. 

ESSENTIAL DUTIES AND RESPONSIBILITIES

  1. Ensures that all inspections are properly performed on completed work and the proper inspection records, reports and forms are properly executed prior to releasing the aircraft for safe for flight operations.
  2. Ensures that current pertinent Aircraft Manufacturers’ technical data (blueprints) or US Army Technical Manuals are used as appropriate for work being accomplished.
  3. Ensures that tools and precision test equipment used on work being accomplished has a current calibration label, if the tool or test equipment requires calibration.
  4. Ensures that no defective, unserviceable, or non-airworthy parts are installed on or in aircraft, components or articles released for flight operations. Ensures that rejected and unserviceable parts are handled in such a way as to prevent their reuse.
  5. Submits reports of defects of non-airworthy condition in accordance with Aircraft Manufacturers’ requirements and/or US Army regulations. Follows MRB procedure as required for production aircraft.
  6. Conducts the preliminary, hidden damage, in process, and final inspection of all articles processed in relation to work being accomplished and records inspection results.
  7. Ensures that all equipment/components removed for repair and/or to gain access are properly documented, tagged and identified on the appropriate forms.
  8. Ensures continuity of inspection; assuring completion of required inspections when personnel, shift, or assignment changes occur.
  9. Be thoroughly familiar with all inspection methods, techniques and practices used in areas of responsibility to determine the quality of airworthiness of an aircraft undergoing maintenance or modifications.
  10. Shall contact the Quality Control Manager should there be any conflicts with other designated inspectors related to the release for flight of an aircraft and or component parts thereof. 
  11. Ensures that appropriate maintenance manual repair and inspection procedures, service bulletins and letters and other data as appropriate for work being accomplished are included as part of the work order. For production work, all work is completed in accordance with the released engineering, i.e., blueprints or process specifications.
  12. Ensures that the work order discrepancy corrective action is adequate for the work accomplished and that preliminary inspections are accomplished on applicable articles.
  13. Shall not perform inspections on any installations in which he has performed work.
  14. Shall ensure that parts/components as received from the parts department are accompanied by proper identification and traceability.

 

Featured Job

Sheetmetal Assembly Mechanic posted 2/12/2021 Ref No. 2130031761

Equipment: Heavy
Location: Louisiana, LA

  • Fabricates, assembles, installs, and repairs production sheet metal products and equipment such as control boxes, drain pipes, ventilators, and furnace casings in accordance with blueprints, drawings, and specifications.
  • Makes sheet metal layouts; sets up and operates fabricating machinery; shapes metal over anvils, blocks, or forms; operates welding and soldering equipment; and inspects assemblies and installations for conformance to specifications.
  • May monitor and verify quality in accordance with statistical process or other control procedures.

Featured Job

A&P Mechanic posted 2/8/2021 Ref No. 2130031723

Equipment: Regional Airlines
Location: Macon, GA

Seeking A&P mechanics in Macon, GA

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Featured Job

Structures Technician- NEW BONUS posted 1/29/2021 Ref No. 2130031695

Equipment: Heavy
Location: Tucson, AZ

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  •  Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  •  Assist in providing time estimates as required
  • Fabricate sheet and/or composite components


 

Featured Job

Structures Technician- NEW BONUS posted 1/29/2021 Ref No. 2130031694

Equipment: Heavy
Location: Bridgeport, WV

NEW BONUS BEING OFFERED

  • Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics.
  • Perform and document all work performed per appropriate manuals and regulations as required.
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft part
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Perform mechanical / electrical removals and installations as required
  • May assist with maintenance at off-site locations
  • Assist in wing removal as required
  • Assist maintenance as required
  • Inspect confined areas of airframe
  • Assist in designing, modifying and welding metal fixtures as required
  • Assist in providing time estimates as required
  • Fabricate sheet and/or composite components


Job Alert Banner

Search...

Clear Search Criteria

Jobs for...